NEW PRODUCTS
  FROM J.W. WINCO


Below you will find our newest products and product lines.

 
  Section 1 - Adjustable Levers
  GN 300.6 - All Stainless Steel Adjustable Levers GN 300.6
Polished Stainless Steel Adjustable Levers
GN 300.6 - Polished Stainless Steel Adjustable Levers GN 300.6
Polished Stainless Steel Adjustable Levers
 GN 99.2 - Steel Adjustable Clamping Levers, Push to Disengage GN 99.2
Steel Adjustable Clamping Levers, Push to Disengage
 GN 99.2 - Steel Adjustable Clamping Levers, Push to Disengage GN 99.2
Steel Adjustable Clamping Levers, Push to Disengage
   
  Section 2 - Control Levers
  GN 6305.1 - Steel Quick Release Toggle Nuts

GN 6305.1
Steel Quick Release Toggle Nuts

GN 150.5 - Stainless Steel Split Hubs for Gear Lever Handles GN 150.5
Stainless Steel Split Hubs for Gear Lever Handles
           
                     
  Section 3 - Pull Handles and Access Hardware
  GN 565.9 - Stainless Steel Pull Handles - Tapped or Thru Holes GN 565.9
Stainless Steel Pull Handles - Tapped or Thru Holes
EN 625 - Technopolymer Plastic Cabinet U Handles-Tapped EN 625
Technopolymer Plastic Cabinet "U" Handles-Tapped
EN 628.1 - Ergostyle® Antimicrobial Technopolymer Plastic Bridge Handles-Counterbored Mounting Holes EN 628.1
Antimicrobial Ergostyle® Technopolymer Plastic Bridge Handles-Counterbored Mounting Holes
EN 628.3 - Flexible Ergostyle®  Technopolymer Plastic Bridge Handles-Tapped EN 628.3
Flexible Ergostyle® Technopolymer Plastic Bridge Handles-Tapped
EN 628.2 - Spacers for EN 628 and EN 628.3 Bridge Handles EN 628.2
Spacers for EN 628 and EN 628.3 Bridge Handles
  EN 627 - Technopolymer Plastic Cabinet U Handles-Tapped EN 627
Technopolymer Plastic Cabinet "U" Handles-Tapped
EN 932 - Technopolymer Plastic Ledge Handles with Lock EN 932
Technopolymer Plastic Ledge Handles with Lock
GN 720 - Stop Locks GN 720
Stop Locks
GN 115.10 - Latches with Gripping Tray, Operation with Key, Not Lockable GN 115.10
Latches with Gripping Tray, Operation with Key, Not Lockable
GN 115.10 - Latches with Gripping Tray, Lockable GN 115.10
Latches with Gripping Tray, Lockable
  GN 115.7 - Zinc Die Cast Door Handles with Latch Mechanism

GN 115.7
Zinc Die Cast Door Handles with Latch Mechanism

GN 115.8 - Zinc Die Cast Hook-Type Latches, Operation with Key

GN 115.8
Zinc Die Cast Hook-Type Latches, Operation with Key

GN 115.8 - Zinc Die Cast Hook-Type Latches, Lockable

GN 115.8
Zinc Die Cast Hook-Type Latches, Lockable

GN 115.8 - Zinc Die Cast Hook-Type Latches, Not Lockable, Operation with Various Components

GN 115.8
Zinc Die Cast Hook-Type Latches, Not Lockable, Operation with Various Components

GN 136 - Steel Weldable Hinges GN 136
Steel or Stainless Steel Sheet Metal Hinges
  GN 138 - Zinc Die Cast Hinges with 2 x 2 Threaded Blind Bores GN 138
Zinc Die Cast Hinges with 2 x 2 Threaded Blind Bores
GN 139.5 - Stainless Steel Hinges with Electrical Switching Function, with Safety Switch GN 139.5
Stainless Steel Hinges with Electrical Switching Function, with Safety Switch
GN 139.6 - Stainless Steel Hinges without Safety Switch GN 139.6
Stainless Steel Hinges without Safety Switch
EN 157 - Plastic Hinges EN 157
Plastic Hinges
EN 159 - Hinges for Use with Profile Systems EN 159
Hinges for Use with Profile Systems
  EN 159.1 - Double Hinges for Use with Profile Systems EN 159.1
Double Hinges for Use with Profile Systems
EN 236 - Technopolymer Plastic Adjustable Hinges EN 236
Technopolymer Plastic Adjustable Hinges
GN 237 - Zinc Die-Cast Hinges with Extended Hinge Wing GN 237
Zinc Die-Cast Hinges with Extended Hinge Wing
GN 237 - Stainless Steel Hinges with Extended Hinge Wing GN 237
Stainless Steel Hinges with Extended Hinge Wing
EN 237.1-CL - Plastic Cleanline Hinges EN 237.1-CL
Plastic Cleanline Hinges
  GN 437 - Zinc Die-Cast Hinges with Adjustable Friction GN 437
Zinc Die-Cast Hinges with Adjustable Friction
GN 129.2 - Steel Zinc-Plated Hinges GN 129.2
Steel Zinc-Plated Hinges
GN 129.3 - Steel Zinc-Plated Hinges GN 129.3
Steel Zinc-Plated Hinges
GN 129.5 - Stainless Steel Hinges GN 129.5
Stainless Steel Hinges
EN 239.3 - Plastic Hinges without Integrated Switch EN 239.3
Plastic Hinges without Integrated Switch
  EN 239.4 - Plastic Hinges with Integrated Switch EN 239.4
Plastic Hinges with Integrated Switch
               
                     
  Section 4 - Revolving and Operating Handles
  GN 798.2 - Plastic or Aluminum Stepped Revolving Handles, Tapped Type GN 798.2
Plastic or Aluminum Stepped Revolving Handles, Tapped Type
GN 75 - Stainless Steel Waist Shaped Knobs- Tapped and Stud Types GN 75.5
Stainless Steel Waist Shaped Knobs- Tapped and Stud Types
           
                     
  Section 5 - Handwheels
  GN 227.4 - A4 Stainless Steel Spoked Handwheels GN 227.4
A4 Stainless Steel Spoked Handwheels
GN 957 - Aluminum Control Knobs for Position Indicators
GN 957
Aluminum Control Knobs for Position Indicators
EN 577.9 - Technopolymer Plastic Handwheels for Positive Drive Position Indicators EN 577.9
Technopolymer Plastic Solid Disk Handwheels for Positive Drive Position Indicators
EN 000.9 - Plastic Position Indicators for EN 577.9 Handwheels EN 000.9
Plastic Position Indicators for EN 577.9 Handwheels
   
                     
  Section 7 - Leveling Elements
  GN 21 - Metric Size Stainless Steel Leveling Feet with Turned Base, without Mounting Bores GN 21
Metric Size Stainless Steel Leveling Feet with Turned Base, without Mounting Bores
GN 3 - Metric Size Stainless Steel Leveling Feet with Turned Base, with Mounting Bores GN 23
Metric Size Stainless Steel Leveling Feet with Turned Base, with Mounting Bores
GN 341.2 - Metric Size Stainless Steel Leveling Feet for Sanitary Applications, White Rubber Pad GN 341.2
Metric Size Stainless Steel Leveling Feet for Sanitary Applications, White Rubber Pad
GN 6311.4 - Metric Size Steel Leveling Feet with or without Plastic Base Cap GN 6311.4
Metric Size Steel Leveling Feet with or without Plastic Base Cap
   
                     
  Section 8 - Clamping Knobs
  DIN 6336-NI - Inch and Metric Size, Stainless Steel Hand Knobs - Blank, Tapped or Blind Bore DIN 6336-NI
Inch and Metric Size, Stainless Steel Hand Knobs - Blank, Tapped or Blind Bore
GN 111.6 - Stainless Steel Lanyard Rings GN 111.6
Stainless Steel Lanyard Rings (for Making Knobs Captive)
GN 6336.13 - Metric Size, Nylon Plastic Hand Knobs with Loss Protection, Tapped Type GN 6336.13
Metric Size, Nylon Plastic Hand Knobs with Loss Protection, Tapped Type
GN 6336.13 - Metric Size, Nylon Plastic Hand Knobs with Loss Protection, with Theaded Stud GN 6336.13
Metric Size, Nylon Plastic Hand Knobs with Loss Protection, with Theaded Stud
DIN 6335-NI - Inch and Metric Size, Stainless Steel Star Knobs - Blank, Tapped or Blind Bore DIN 6335-NI
Inch and Metric Size, Stainless Steel Star Knobs - Blank, Tapped or Blind Bore
  GN 5345 / GN 5345.4 - Inch and Metric Size, Stainless Steel Three Lobe Knobs - Blind Tapped, Blind Bore, Tapped Thru and Blank GN 5345 /
GN 5345.4

Inch and Metric Size, Stainless Steel Three Lobe Knobs - Blind Tapped, Blind Bore, Tapped Thru and Blank
GN 7336.5 - Metric Size, Glass Fiber Reinforced Plastic Hollow Knurled Knobs - Steel Threaded Stud, with Tip
GN 7336.5
Metric Size, Glass Fiber Reinforced Plastic Hollow Knurled Knobs - Steel Threaded Stud, with Tip
           
                     
  Section 9 - Control Knobs
  GN 711.2 - Metric Size Aluminum Rulers with 3.3 mm Mounting Holes GN 711.2
Metric Size Aluminum Rulers with 3.3 mm Mounting Holes
GN 711.3 - Indicator Arrow for Use with Rulers GN 711.3
Indicator Arrow for Use with Rulers
GN 2402 - Steel Linear Slides with No Extension GN 2402
Steel Linear Slides with No Extension
GN 2404 - Steel Telescopic Linear Slides with Partial Extension GN 2404
Steel Telescopic Linear Slides with Partial Extension
GN 2406 - Steel Telescopic Linear Slides, S-Shaped, with One Side Extension GN 2406
Steel Telescopic Linear Slides, S-Shaped, with One Side Extension
X-Y
 
  GN 900.3 - Steel Telescopic Linear Slides with H-Shaped Rail GN 2408
Steel Telescopic Linear Slides with H-Shaped Rail
GN 2410 - Steel Telescopic Linear Slides, Dual Configuration, with Full Extension GN 2410
Steel Telescopic Linear Slides, Dual Configuration, with Full Extension
GN 2422 - Cam Roller Linear Guide Rails GN 2422
Cam Roller Linear Guide Rails
GN 2424 - Cam Roller Carriages GN 2424
Cam Roller Carriages
GN 2426 - Cam Rollers GN 2426
Cam Rollers
  GN 2428 - Wipers for Linear Guide Rails GN 2428
Wipers for Linear Guide Rails
GN 2277 - Bull's-Eye Levels with Mounting Flange GN 2277
Bull's-Eye Levels with Mounting Flange
GN 2277.1 - Adjustment Plates for GN 2277 Bull's-Eye Levels GN 2277.1
Adjustment Plates for GN 2277 Bull's-Eye Levels
GN 2278 - Bull's-Eye Levels for Insertion into Bore Holes GN 2278
Bull's-Eye Levels for Insertion into Bore Holes
GN 2279 - Bull's-Eye Levels for Surface Mounting GN 2279
Bull's-Eye Levels for Surface Mounting
  GN 2280 - Bull's-Eye Levels, Adjustable, with Mounting Threads GN 2280
Bull's-Eye Levels, Adjustable, with Mounting Threads
GN 2281 - Bull's-Eye Levels for Installation in Plates and Housings GN 2281
Bull's-Eye Levels for Installation in Plates and Housings
GN 2282 - Screw-On Levels for Mounting with Screws GN 2282
Screw-On Levels for Mounting with Screws
       
                     
  Section 10 - Indexing, Spring and Ball Plungers
  GN 612.9 - Zinc Die Cast Cam Action Indexing Plungers GN 612.9
Metric Size Zinc Die Cast Cam Action Indexing Plungers with Flange for Surface Mounting
GN 412.3 - Steel Locating Bushings for Indexing Plungers GN 412.3
Metric Size Steel Locating Bushings with Cone for Indexing Plungers
GN 413 - Metric Size Steel Indexing Plungers GN 413
Metric Size Steel Indexing Plungers
GN 413 - Metric Size Stainless Steel Indexing Plungers GN 413
Metric Size Stainless Steel Indexing Plungers
GN 909 - Steel Flat Hexagon Nuts for Indexing Plungers GN 909
Metric Size Steel Flat Hexagon Nuts for Indexing Plungers
  GN 614.1 - Metric Size Stainless Steel Spring Plungers, Long Body, Press-Fit Type GN 614.4
Metric Size Stainless Steel Spring Plungers, Long Body, Press-Fit Type
GN 615.4 - Metric Size Steel or Stainless Steel Short Spring Plungers with Hexagon Socket Drive GN 615.4
Metric Size Steel or Stainless Steel Short Spring Plungers with Hexagon Socket Drive
           
                     
  Section 11 - Jig, Fixture and Fastening Components
GN 55.1 - Steel Disk-Shaped Raw Magnets with Bore or Countersunk Thru Hole GN 55.1
Steel Disk-Shaped Raw Magnets with Bore or Countersunk Thru Hole
GN 55.2 - Steel Disk-Shaped Raw Magnets GN 55.2
Steel Disk-Shaped Raw Magnets
GN 55.3 - Steel Rod-Shaped Raw Magnets GN 55.3
Steel Rod-Shaped Raw Magnets
GN 55.4 - Steel Block-Shaped Raw Magnets GN 55.4
Steel Block-Shaped Raw Magnets
GN 551.1 - Stainless Steel Fully Threaded Studs GN 551.1
Stainless Steel Fully Threaded Studs
GN 709.15 - Stainless Steel Clamping Pads with Threaded Stem GN 709.15
Stainless Steel Clamping Pads with Threaded Stem
GN 709.25 - Stainless Steel Clamping Pads with Tapped Body GN 709.25
Stainless Steel Clamping Pads with Tapped Body
GN 709.35 - Stainless Steel Clamping Pads with Height Adjustment GN 709.35
Stainless Steel Clamping Pads with Height Adjustment
GN 709.7 - Steel Clamping Pads with O-Ring GN 709.7
Steel Clamping Pads with O-Ring
GN 709.8 - Steel Clamping Pads, Adjustable, with O-Ring GN 709.8
Steel Clamping Pads, Adjustable, with O-Ring
WN 787 - Inch Size Steel T-Slot Bolts WN 787
Inch Size Steel T-Slot Bolts
GN 6342 - Metric Size Steel or Stainless Steel Washers with Axial Friction Bearing GN 6342
Metric Size Steel or Stainless Steel Washers with Axial Friction Bearing
GN 706.4 - Metric Size Split Set Collars with Adjustable Hand Lever GN 706.4
Metric Size Split Set Collars with Adjustable Hand Lever
GN 826 - Metric Size Control Knob Flanges for Adjustable Spindles GN 826
Metric Size Control Knob Flanges for Adjustable Spindles
GN 350.5 - Steel Leveling Sets, with Spherical Washers, with Locknut GN 350.5
Steel Leveling Sets, with Spherical Washers, with Locknut
GN 350.5-NI - Stainless Steel Leveling Sets, with Spherical Washers, with Locknut GN 350.5-NI
Stainless Steel Leveling Sets, with Spherical Washers, with Locknut
GN 355 - Metric Size Steel Leveling Elements GN 355
Metric Size Steel Leveling Elements
GN 355 - Metric Size Stainless Steel Leveling Elements GN 355
Metric Size Stainless Steel Leveling Elements
GN 355.1 - Steel Assembly Tools for GN 355 Leveling Elements GN 355.1
Steel Assembly Tools for GN 355 Leveling Elements
GN 588 - Metric Size Steel Thread Adapters for GN 581 and GN 586 GN 588
Metric Size Steel Thread Adapters for GN 581 and GN 586
GN 5860 - Inch and Metric Size Steel Safety Swivel Load Rings GN 5860
Inch and Metric Size Steel Safety Swivel Load Rings
GN 584 - Metric Size Steel D Shackles GN 584
Metric Size Steel D Shackles
GN 585 - Metric Size Steel Bow Shackles GN 585
Metric Size Steel Bow Shackles
GN 1130 - Metric Size Steel Lifting Pins GN 1130
Metric Size Steel Lifting Pins
GN 1130 - Metric Size Stainless Steel Lifting Pins GN 1130
Metric Size Stainless Steel Lifting Pins
GN 1132 - Metric Size Stainless Steel Holding Bushings for GN 1130 Lifting Pins GN 1132
Metric Size Stainless Steel Holding Bushings for GN 1130 Lifting Pins
               
                     
  Section 12 - Fluid Level Indicators and Components
  EN 554 - Aluminum Magnetic Threaded Plugs EN 554
Aluminum Magnetic Threaded Plugs
GN 252.5 - Stainless Steel Threaded Plugs GN 252.5
Stainless Steel Threaded Plugs
DIN 908 - Threaded Plugs with or without Sealing Washers DIN 908
Threaded Plugs with or without Sealing Washers
EN 740.1/EN 745.1/EN 747.1 - Label Disks for Oil  Plugs EN 740.1/
EN 745.0/
EN 747.1

Label Disks for Oil Plugs
   
   
  Section 13 - Joints
  GN 71752 - Steel, Zinc Plated Fork Heads (Yokes) GN 71752
Inch Size, Steel, Zinc Plated Fork Heads (Yokes)
GN 71752 - Stainless Steel Fork Heads (Yokes) GN 71752
Inch Size, Stainless Steel Fork Heads (Yokes)
WN 751 - Stainless Steel, Fork Heads (Yokes) with Retaining Ring WN 751-NI
Inch Size, Stainless Steel Fork Heads (Yokes) with Retaining Ring
GN 751-AL - Aluminum Fork Heads (Yokes) with Retaining Clip GN 751-AL
Aluminum Fork Heads (Yokes) with with Retaining Clip
   
  Section 15 - Toggle Clamps
 
GN 854 - Metric Size Steel Latch Type Toggle Clamps with Trigger Function
GN 854
Metric Size Steel Latch Type Toggle Clamps with Trigger Function
GN 855 - Metric Size Steel C-Clamps
GN 855
Metric Size Steel C-Clamps
GN 951.1 - Metric Size Square U-Bolts
GN 951.1
Metric Size Square U-Bolts for GN 851, GN 851.1 and GN 851.2
GN 951.2 - Metric Size Square U-Bolts
GN 951.2
Metric Size Square U-Bolts for GN 852
GN 8330 - Metric Size Steel Hook Type Toggle Clamps GN 8330
Metric Size Steel Hook Type Toggle Clamps
  GN 8330 - Metric Size Stainless Steel Hook Type Toggle Clamps GN 8330
Metric Size Steel Hook Type Toggle Clamps
               
  Section 16 - Tube Clamping Components
 
GN 482 - Metric Size Aluminum Swivel Clamp Joints
GN 482
Metric Size Aluminum Swivel Clamp Joints
GN 483 - Metric Size Aluminum T-Swivel Clamp Joints
GN 483
Metric Size Aluminum T-Swivel Clamp Joints
GN 484 - Metric Size Aluminum Attachment Clamp Joints
GN 484
Metric Size Aluminum Attachment Clamp Joints
GN 490 - Metric Size Aluminum Adjustable Two-Way Clamping Joints
GN 490
Metric Size Aluminum Adjustable Two-Way Clamping Joints
GN 511.1 - Metric Size Adjustable Clamping Lever Kits for Swivel Clamp Joints

GN 511.1
Metric Size Adjustable Clamping Lever Kits for Swivel Clamp Joints
 
GN 132.5 - Metric Size Stainless Steel Two-Way Connector Clamps, Round Bore Type
GN 132.5
Metric Size Stainless Steel Two-Way Connector Clamps, Round Bore Type
GN 146.5 - Metric Size Stainless Steel Flanged Connector Clamps with Four Mounting Holes
GN 146.5
Inch and Metric Size Stainless Steel Flanged Connector Clamps with Four Mounting Holes
GN 146.6 - Metric Size Stainless Steel Flanged Connector Clamps with Two Mounting Holes
GN 146.6
Metric Size Stainless Steel Flanged Connector Clamps with Two Mounting Holes
GN 163.5 - Metric Size Stainless Steel Base Plate Connector Clamps, Round Bore Type
GN 163.5
Metric Size Stainless Steel Base Plate Connector Clamps, Round Bore Type
GN 192.5 - Metric Size Aluminum T-Angle Connector Clamps, Round Bore Type
GN 192.5
Metric Size Aluminum T-Angle Connector Clamps, Round Bore Type
 
GN 296 - Metric Size Installation Kits for Position Indicators Used on GN 291.1 Square  Linear Actuators
GN 296
Metric Size Installation Kits for Position Indicators Used on GN 291.1 Square Linear Actuators
GN 491 - Metric Size Steel Double Tube Linear Actuators with Right Hand Thread, Single Slider
GN 491
Metric Size Steel Double Tube Linear Actuators with Right Hand Thread, Single Slider
GN 492 - Metric Size Steel Double Tube Linear Actuators with Right Hand Thread, Double Slider
GN 492
Metric Size Steel Double Tube Linear Actuators with Right Hand Thread, Double Slider
GN 960 - Angle Brackets for 30/40/45 mm Aluminum Profile Systems
GN 960
Angle Brackets for 30/40/45 mm Aluminum Profile Systems
GN 967 - Flat and L-Shaped Connecting Brackets for Aluminum Profile Systems
GN 967
Flat and L-Shaped Connecting Brackets for Aluminum Profile Systems
 
EN 561 - Metric Size Technopolymer Plastic Mounting Angle Brackets
EN 561
Metric Size Technopolymer Plastic Mounting Angle Brackets
GN 965 - Metric Size Steel T-Nut Assemblies for 30/40 mm Aluminum Profile Systems GN 965
Metric Size Steel T-Nut Assemblies for 30/40 mm Aluminum Profile Systems
GN 968 - Metric Size Steel T-Nut Assemblies for 30/40/50 mm Aluminum Profile Systems GN 968
Metric Size Steel T-Nut Assemblies for 30/40/50 mm Aluminum Profile Systems
       
  Section 18 - Tools
  No. 911 LG-HF - Inch Size Long Hexagon Key Sets, with Ball End No. 911 LG-H100F
Inch Size Long Hexagon Key Sets, with Ball End
No. 911 LG-H100F - Metric Size Long Hexagon Key Sets, with Ball End No. 911 LG-H100F
Metric Size Long Hexagon Key Sets, with Ball End
           
  Section 19 - Fasteners and Seals
 
DIN 934 - Hex Nuts
DIN 7603
Sealing Washers
               

J.W. Winco, Inc. © 2015 | Terms and Conditions | Privacy / Disclaimer | ISO 9001:2008 | 1-800-877-8351