You are here: Product Overview > 3.3 Hinging, Latching, Locking of Doors and Covers > Edge Protection Profiles > GN 2180 Edge Protection Seal Profiles next product

Because of a web page matching your requested link is no longer valid. You have been automatically redirected to the new link.

GN 2180 Edge Protection Seal Profiles Material NBR / EPDM (UL Certified)

Photo

Type: A - Upper seal profile

Standard Sheet GN 2180 Print This Page Edge Protection Profiles - Leaflet Application Examples General Information Technical Information Construction Example UL 50 Certification UL 94 HB-Certification Plastic Characteristics

Product description

Information

Edge protection seal profiles GN 2180 can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded clamp insert prevents detachment. Glue or other adhesives are not required.

When assembled, the profile should deform slightly according to w₂. This ensures an optimal seal. Adherance to the guideline placement radii (r₁ to r₄) is recommended in order to ensure a tight profile seal and to make assembly easier.

The NBR profiles are recommended for use in cases where contact with fuels, oils or coolants can occur.

EPDM profiles are certified according to UL 50 and UL 94-HB and are therefore approved for the US American and the Canadian market.

Specification

Clamping profile / sealing profile
Ethylene propylene diene rubberEPDM

Black
Clamping profile hardness 65 ±5 Shore A
Sealing profile hardness 25 ±5 Shore A
Temperature resistant from
-40 °F to +212 °F (-40 °C to +100 °C)
Acrylonitrile butadiene rubberNBR
(Only for sizes h₁ = 20.5 and 13 mm)
Black
Clamping profile hardness 60 ±5 Shore A
Sealing profile hardness 25 ±5 Shore A
Temperature resistant from
-22 °F to +212 °F (-30 °C to +100 °C)

Clamp insert
Steel wire polyester clamping band

RoHS

Technical drawing

GN 2180 Edge Protection Seal Profiles, Material NBR / EPDM (UL Certified) sketch

Hide technical drawing

Part Options / Table

Type

A	Upper seal profile
D	Side seal profile

Part Number EPDM - Ethylene propylene diene rubber	Part Number NBR - Acrylonitrile butadiene rubber	h₁ Type A	h₁ Type D	Length l in meters	a Clamping range in millimeters	b	h₂	h₃	h₄	k	r₁	r₂	r₃	r₄	w₁	w₂ At up to 50 % of permissible deformation

2180-EPDM-15.5-A-20		0.61	-	20	0.8 - 2.5	0.33	0.35	-	-	-	3.15	1.97	0.79	-	0.26	0.20
2180-EPDM-15.5-A-50		0.61	-	50	0.8 - 2.5	0.33	0.35	-	-	-	3.15	1.97	0.79	-	0.26	0.20
2180-EPDM-20.5-A-20	2180-NBR-20.5-A-20	0.81	-	20	1 - 3.5	0.43	0.41	-	-	-	3.54	1.97	1.18	-	0.39	0.28
2180-EPDM-20.5-A-50	2180-NBR-20.5-A-50	0.81	-	50	1 - 3.5	0.43	0.41	-	-	-	3.54	1.97	1.18	-	0.39	0.28

Part Number EPDM - Ethylene propylene diene rubber	Part Number NBR - Acrylonitrile butadiene rubber	h₁ Type A	h₁ Type D	Length l in meters	a Clamping range in millimeters	b	h₂	h₃	h₄	k	r₁	r₂	r₃	r₄	w₁	w₂ At up to 50 % of permissible deformation

2180-EPDM-11.5-D-20		-	0.45	20	0.8 - 2.5	0.34	0.35	0.10	0.15	0.16	1.18	1.57	3.15	1.57	0.33	0.27
2180-EPDM-11.5-D-50		-	0.45	50	0.8 - 2.5	0.34	0.35	0.10	0.15	0.16	1.18	1.57	3.15	1.57	0.33	0.27
2180-EPDM-13-D-20	2180-NBR-13-D-20	-	0.51	20	1 - 3.5	0.43	0.42	0.09	0.18	0.19	1.57	1.97	3.94	3.15	0.44	0.34
2180-EPDM-13-D-50	2180-NBR-13-D-50	-	0.51	50	1 - 3.5	0.43	0.42	0.09	0.18	0.19	1.57	1.97	3.94	3.15	0.44	0.34

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

h₁ Type A	h₁ Type D	Length l in meters		a Clamping range in millimeters	b	h₂	h₃	h₄	k	r₁	r₂	r₃	r₄	w₁	w₂ At up to 50 % of permissible deformation

0.61	-	20	50	0.8 - 2.5	0.33	0.35	-	-	-	3.15	1.97	0.79	-	0.26	0.20
0.81	-	20	50	1 - 3.5	0.43	0.41	-	-	-	3.54	1.97	1.18	-	0.39	0.28
-	0.45	20	50	0.8 - 2.5	0.34	0.35	0.10	0.15	0.16	1.18	1.57	3.15	1.57	0.33	0.27
-	0.51	20	50	1 - 3.5	0.43	0.42	0.09	0.18	0.19	1.57	1.97	3.94	3.15	0.44	0.34

Build & Price

3D Product Configurator

Application Examples




Application examples With their versatility, edge protection profiles / edge protection seal profiles can be implemented in various applications, in conjunction with other standard parts. In particular, combinations with product group 3.3 and product group 2.4 can achieve a variety of useful constructions.

Construction Example

Kantenschutzprofil Konstruktionsbeispiel ZN

Construction example
The construction depicted shows a standard application of edge protection profiles and edge protection seal profiles. The edge protection seal profiles are attached to the door and the fixed frame. The opening for the door is covered with an edge protection profile at its cut edge.

Selected Part

Part Number

Total US Dollars (net)

$194.18

In Stock: 3

In Stock

Roll(s)

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	4	$194.18
5	9	$178.00
10	24	$161.82
≥ 25		$145.64

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 4.982 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.