GN 115.8 Cam Locks with Hook Zinc Die-Cast, with Operating Elements

Photo

GN 115.8 Zinc Die-Cast Cam Locks with Hook, with Operating Elements Type: SCT - With T-handle (Keyed alike)
Identification no.: 1 - Without latch bracket
Finish (Housing collar): CR - Chrome plated
Type: SCT - With T-handle (Keyed alike)
Identification no.: 1 - Without latch bracket
Finish (Housing collar): CR - Chrome plated
GN 115.8 Zinc Die-Cast Cam Locks with Hook, with Operating Elements Type: SCT - With T-handle (Keyed alike)
Identification no.: 1 - Without latch bracket
Finish (Housing collar): CR - Chrome plated GN 115.8 Zinc Die-Cast Cam Locks with Hook, with Operating Elements Type: SC - With key (Keyed alike)
Identification no.: 1 - Without latch bracket
Finish (Housing collar): SW - Black, RAL 9005, textured finish GN 115.8 Zinc Die-Cast Cam Locks with Hook, with Operating Elements Type: SCK - With wing knob (Keyed alike)
Identification no.: 2 - With latch bracket
Finish (Housing collar): CR - Chrome plated

Product description

Information

Cam locks with hook GN 115.8 and latch bracket are mainly used for sliding doors and flaps. The latching action is in a radial direction to the axis of rotation, resulting in a wide variety of different uses.

The latches are delivered with 2 keys and loosely enclosed hook. The key can be removed in both end positions.

Types with a standard lock allow every lock to be opened with the same key. For the types with different lock, there are more than 200 different lock variants, whose keys are marked by numbers.

Specification

  • Cam lock housing
    Zinc die-cast

  • Housing collar
    • Chrome platedCRCR finish
    • Powder coated
      Black, RAL 9005, textured finishSWSW

  • Hook / assembly hardware
    Steel, zinc plated, blue passivated finish

  • Key
    Nickel silver with plastic hand piece

  • Wing knob / T-handle
    Plastic
    Technopolymer (Polyamide PA)
    Black, matte finish

  • Protection class IP65

RoHS

On request

  • Cam locks with other hook distance A
  • Hook with other pivoting radius R

Technical drawing

3D
Hide technical drawing
GN 115.8 Zinc Die-Cast Cam Locks with Hook, with Operating Elements sketch

Part Options / Table

Type

SCWith key (Keyed alike)
SUWith key (Keyed differently)
SCKWith wing knob (Keyed alike)
SUKWith wing knob (Keyed differently)
SCTWith T-handle (Keyed alike)
SUTWith T-handle (Keyed differently)

Hook version

H1Pivoting radius R = 28

Identification no.

1Without latch bracket
2With latch bracket
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
Hook distance Ad
Type
SC, SU

Type
SCK, SUK, SCT, SUT
h
Type
SC, SU

Type
SCK, SUK, SCT, SUT
0.711.101.260.160.24

Build & Price

3D Product Configurator
Type






Hook distance A
Hook version

Finish (Housing collar)
CR
SW
Identification no.


Construction and Assembly Instructions

GN 115.8 Installation holes

For installation of the cam latch, create a bore in the door, cover or hatch as shown in the outline drawing.

The installation bore in the door leaf is usually generated by punching or laser machining during a mass production run.

The installation bore can also be created by drilling or milling as shown in the outline drawings.

For small production runs and steel sheets below 2 mm thickness, Sheet Metal Punches GN 123 are the tool of choice.

The hook can only be attached to the latch after installing the lock housing in the door leaf.

The bolt diameter may be shifted by ± 5 mm, making it easier to adapt the latching mechanism to the installation site.

When latched, the bolt is ideally positioned at the level of the axis of rotation as shown. A sideways offset of as much as 4 mm does not impair the proper function.

The angle of rotation of the hook is normally limited to 90°. Depending on the mounting of the contact pin which is supplied unassembled, the latching action is effected by turning left or right. Without the contact pin, the hook can be rotated by 360°.

GN 115.8 Dimensions of the latch brackets

Selected Part

Total US Dollars (net)
$33.92
In Stock: 28
In Stock
Please note our quantity discounts (US Dollars).
MinMaxPrice
199$33.92
100249$31.10
250499$28.27
≥ 500$25.44
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.365 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

GN 115.8-SC-18-H1-CR-1GN 115.8-SC-18-H1-CR-2GN 115.8-SC-18-H1-SW-1GN 115.8-SC-18-H1-SW-2GN 115.8-SU-18-H1-CR-1GN 115.8-SU-18-H1-CR-2GN 115.8-SU-18-H1-SW-1GN 115.8-SU-18-H1-SW-2GN 115.8-SCK-18-H1-CR-1GN 115.8-SCK-18-H1-CR-2GN 115.8-SCK-18-H1-SW-1GN 115.8-SCK-18-H1-SW-2GN 115.8-SUK-18-H1-CR-1GN 115.8-SUK-18-H1-CR-2GN 115.8-SUK-18-H1-SW-1GN 115.8-SUK-18-H1-SW-2GN 115.8-SCT-18-H1-CR-1GN 115.8-SCT-18-H1-CR-2GN 115.8-SCT-18-H1-SW-1GN 115.8-SCT-18-H1-SW-2GN 115.8-SUT-18-H1-CR-1GN 115.8-SUT-18-H1-CR-2GN 115.8-SUT-18-H1-SW-1GN 115.8-SUT-18-H1-SW-2

This could also be interesting...

Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.