The cart is empty.

USA EN

Mexico EN | ES

English English Español English Français

Search result: safety hook toggle clamp (limited to 100 hits from a total of 577) You are here: Product Overview > 2.4 Tensioning with Clamping Mechanisms > Toggle Clamp Accessories > GN 801.3 Sensor Holders previous product next product

GN 801.3 Sensor Holders Stainless Steel, for Toogle Clamp with Horizontal Base, with / without Sensor

Photo

GN 801.3 Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor Type: V - For vertical acting toggle clamp
Identification no.: 1 - With proximity sensor

Type: V - For vertical acting toggle clamp
Identification no.: 1 - With proximity sensor

GN 801.3 Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor Type: H - For horizontal acting toggle clamp
Identification no.: 1 - With proximity sensor

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 801.3 Print This Page General Information on Toggle Clamps Stainless Steel Characteristics

Product description

Information

Sensor holders GN 801.3 are designed as accessories for GN 810 and GN 820 series toggle clamps and enable contactless monitoring of the clamping positions using an inductive sensor.

When the clamping lever is in clamping position, the sensor electronics provide a high signal, e.g. to a machine control unit, and additionally indicate this switch status with an LED on the sensor.

Operating errors can thus be reliably detected and process reliability increased.

The sensor holder can be retrofitted to toggle clamps and mounted on the right or left, depending on the installation situation of the toggle clamp. All parts are supplied unmounted as a set. The proximity sensor is not included in the scope of delivery of identification no. 2.

Specification

Retaining bracket / Retaining plate
Stainless steel AISI 304

Setting nuts
Stainless steel AISI 304

Socket cap screws / Washers / Nuts
Stainless steel A2

Proximity sensor for identification no. 1

Housing, stainless steel AISI 304
Inductive, 3-pole, PNP contact
Thread M8 x 1
Operating temperature
-13 °F to 176 °F (-25 °C to +80 °C)

RoHS

Accessory

Cables with Connector Coupling GN 330 (3-pole, 2 or 5 meters long)

Technical drawing

GN 801.3 Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor sketch

Hide technical drawing

Part Options / Table

Type

V	For vertical acting toggle clamp
H	For horizontal acting toggle clamp

Identification no.

1	With proximity sensor
2	Without proximity sensor

Part Number 1 - With proximity sensor	Part Number 2 - Without proximity sensor	Size	b ≈ Type V	Type H	h ≈ Type V	Type H	Length l ≈ Type V	Type H	For toggle clamp GN 810, GN 810.3 Type V	GN 820, GN 820.3 Type H

801.3-130-V-1	801.3-130-V-2	130	1.61	-	1.57	-	2.05	-	5.12	-
801.3-230-V-1	801.3-230-V-2	230	1.89	-	1.73	-	2.13	-	9.06	-

Part Number 1 - With proximity sensor	Part Number 2 - Without proximity sensor	Size	b ≈ Type V	Type H	h ≈ Type V	Type H	Length l ≈ Type V	Type H	For toggle clamp GN 810, GN 810.3 Type V	GN 820, GN 820.3 Type H

801.3-130-H-1	801.3-130-H-2	130	-	1.79	-	1.61	-	1.89	-	5.12
801.3-230-H-1	801.3-230-H-2	230	-	2.05	-	1.77	-	1.97	-	9.06

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

Size	b ≈ Type V	Type H	h ≈ Type V	Type H	Length l ≈ Type V	Type H	For toggle clamp GN 810, GN 810.3 Type V	GN 820, GN 820.3 Type H

130	1.61	1.79	1.57	1.61	2.05	1.89	5.12	5.12
230	1.89	2.05	1.73	1.77	2.13	1.97	9.06	9.06

Build & Price

Size

130

230

Type

H - For horizontal acting toggle clamp

V - For vertical acting toggle clamp

Identification no.

1 - With proximity sensor

2 - Without proximity sensor

Assembly Instruction

Sensor holders can be mounted on the left or right of the toggle clamp. To do this, the setting nuts must be tightened on the left or right of the retaining plate to secure them against rotation and loss. This facilitates the further assembly of the sensor holder and the adjustment of the sensor. Subsequent changing of the mounting side is not intended.
The sensor is inserted into the bore in the retaining bracket according to the selected mounting side and the depth is adjusted and fastened using the nuts in such a way that the clamping lever reliably switches it in the clamping position.

Electrical Properties of the Inductive Proximity Sensor

Output function

Normally open (NO)

Output type

PNP

Supply voltage

10 ... 36 V DC

Continuous current I_a

≤ 150 mA

Connection type
Connector

3-pole connector M8x1

Protection type

IP 67

Switching frequency

max. ≤ 2.000 Hz

Power consumption

≤ 16 mA

Voltage drop

≤ 2.5 V

Protection class

III

Switching distance S_n

2 mm

Operating temperature

-13°F ... +176 °F (-25 °C ... +80 °C)

Shock and vibration resistance

30 g, 11 ms / 10 ... 55 Hz, 1 mm

EMC

According to EN 60947-5-2

Reverse polarity protection

Yes

Short-circuit protection

Yes

Activation impulse suppression

Yes

Approvals, conformity declarations

CE marking
UL

Selected Part

Part Number

Total US Dollars (net)

$87.02

Call / Email for Delivery Time

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	4	$87.02
5	9	$79.77
10	24	$72.52
≥ 25		$65.26

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.147 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.