You are here: Product Overview > 3.5 Controlling, Venting, Sealing of Liquids and Gases > Breather Caps, Breather Valve Caps > GN 884 Breather Filters previous product next product

GN 884 Breather Filters Brass

Photo

Type: A - Low design

GN 884 Brass Breather Filters Type: B - High design, with stainless steel cap

Standard Sheet GN 884 Print This Page Stainless Steel Characteristics

Product description

Information

Breather filters GN 884 are used when an air exchange is to be enabled between a closed interior and the outside. This effectively prevents underpressure or overpressure occurring in the system.

The stainless steel wire mesh prevents airborne particles above a certain size from entering the interior from the outside and, at the same time, ensures that fluid particles do not escape to the outside.

A symbol “BE” (type A) or a blue colored ring (type B) mark the filter function. The recommended installation position is vertically upwards.

Assembly note:
For wall thicknesses below 4 mm, use thin hex nuts GN 7430.

Specification

Body
BrassMS

Air filter

Stainless steel wire mesh AISI 304
Filter class G2-G3
Mean separation efficiency
(Am approx. 65-85 %,
based on a particle size > 10 μm)

Seal DIN 7603 A
Soft iron 1.0338
(at d₁ = M10x1: PA6)

Breather cap (Type B)
Stainless steel AISI 304

Temperature resistant from
-22 °F to +392 °F (-30 °C to +200 °C)

RoHS

On request

Other materials
Other dimensions

Technical drawing

Hide technical drawing

Part Options / Table

Type

A	Low design
B	High design, with stainless steel cap

Part Number A - Low design	Part Number B - High design, with stainless steel cap	d₁ Fine thread	d₁ Pipe thread	d₂	d₃	e₁	e₂	l₁	l₂	l₃	l₄	l₅	A/F Type A	Type B	Approx. air outlet l/min. at ∆ 0.2 bar Type A	Type B


884-G1/8-A-MS	884-G1/8-B-MS	-	G 1/8	0.53	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	24	46
884-M10X1-A-MS	884-M10X1-B-MS	M 10 x 1	-	0.57	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	24	46
884-M12X1.5-A-MS	884-M12X1.5-B-MS	M 12 x 1.5	-	0.71	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	24	46
884-G1/4-A-MS	884-G1/4-B-MS	-	G 1/4	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	24	46
884-M14X1.5-A-MS	884-M14X1.5-B-MS	M 14 x 1.5	-	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	24	46
884-M16X1.5-A-MS	884-M16X1.5-B-MS	M 16 x 1.5	-	0.87	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	24	46
884-M18X1.5-A-MS	884-M18X1.5-B-MS	M 18 x 1.5	-	0.94	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	24	46
884-M22X1.5-A-MS	884-M22X1.5-B-MS	M 22 x 1.5	-	1.06	0.49	1.22	1.14	0.35	0.43	0.30	0.30	0.65	1.06	1.06	24	46
884-G3/8-A-MS	884-G3/8-B-MS	-	G 3/8	0.91	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	24	46
884-G1/2-A-MS	884-G1/2-B-MS	-	G 1/2	1.02	0.49	1.22	1.14	0.33	0.43	0.31	0.31	0.67	1.06	1.06	24	46
884-G3/4-A-MS	884-G3/4-B-MS	-	G 3/4	1.26	0.49	1.46	1.38	0.33	0.43	0.31	0.31	0.67	1.26	1.26	24	46

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Fine thread	d₁ Pipe thread	d₂	d₃	e₁	e₂	l₁	l₂	l₃	l₄	l₅	A/F Type A	Type B	Approx. air outlet l/min. at ∆ 0.2 bar Type A	Type B

-	G 1/8	0.53	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	24	46
M 10 x 1	-	0.57	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	24	46
M 12 x 1.5	-	0.71	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	24	46
M 14 x 1.5	G 1/4	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	24	46
M 16 x 1.5	-	0.87	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	24	46
M 18 x 1.5	-	0.94	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	24	46
M 22 x 1.5	-	1.06	0.49	1.22	1.14	0.35	0.43	0.30	0.30	0.65	1.06	1.06	24	46
-	G 3/8	0.91	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	24	46
-	G 1/2	1.02	0.49	1.22	1.14	0.33	0.43	0.31	0.31	0.67	1.06	1.06	24	46
-	G 3/4	1.26	0.49	1.46	1.38	0.33	0.43	0.31	0.31	0.67	1.26	1.26	24	46

Build & Price

3D Product Configurator

Selected Part

Part Number

Total US Dollars (net)

$8.27

In Stock: 7

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	$8.27
50	99	$7.58
100	249	$6.90
≥ 250		$6.21

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.016 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.