Heavy Duty Ball Lock Pins GN 113.10

GN 113.10 Stainless Steel Heavy Duty Ball Lock Pins, with Stainless Steel Shank AISI 630

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 113.10 Print This Page List of Lock Pin Types Load Rating Information ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Heavy duty ball lock pins GN 113.10 are used for rapid connecting and securing of components or workpieces. A typical application is locating pins that have to regularly be moved in and out of position.

These ball lock pins have a high load capacity, due to the pin being made of heavy duty, hardened and highly abrasion-resistant stainless steel.

By depressing the spring loaded push button, the two balls are freed, and by releasing the push button the balls are locked.

The technical section contains the load ratings for the double shear strength (breaking strength).

Specification

Shank pin
Stainless steel AISI 630
Precipitation-hardened

Knob
Stainless steel AISI 316L

Balls
Stainless steel AISI 420C

Spring
Stainless steel
German Material No. 1.4565

RoHS

Accessory

Ball Chains GN 111
Ball Chains GN 111.5
Retaining Cables GN 111.2
Spiral Retaining Cables GN 111.4

GN 113.10 Stainless Steel Heavy Duty Ball Lock Pins, with Stainless Steel Shank AISI 630 sketch

Hide technical drawing

Part Options / Table

Location
bore +0.004: 0.236

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-6-10	0.236 -0.002/-0.003	0.394 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236
113.10-6-15	0.236 -0.002/-0.003	0.591 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-20	0.236 -0.002/-0.003	0.787 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-25	0.236 -0.002/-0.003	0.984 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-30	0.236 -0.002/-0.003	1.181 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-35	0.236 -0.002/-0.003	1.378 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-40	0.236 -0.002/-0.003	1.575 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-45	0.236 -0.002/-0.003	1.772 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-50	0.236 -0.002/-0.003	1.969 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-60	0.236 -0.002/-0.003	2.362 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-70	0.236 -0.002/-0.003	2.756 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004
113.10-6-80	0.236 -0.002/-0.003	3.150 +0.024	0.28	0.91	0.40	0.28 ±0.04	0.795 -0.008	0.236 +0.004

Location
bore +0.004: 0.315

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-8-10	0.315 -0.002/-0.003	0.394 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315
113.10-8-15	0.315 -0.002/-0.003	0.591 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-20	0.315 -0.002/-0.003	0.787 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-25	0.315 -0.002/-0.003	0.984 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-30	0.315 -0.002/-0.003	1.181 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-35	0.315 -0.002/-0.003	1.378 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-40	0.315 -0.002/-0.003	1.575 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-45	0.315 -0.002/-0.003	1.772 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-50	0.315 -0.002/-0.003	1.969 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-60	0.315 -0.002/-0.003	2.362 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-70	0.315 -0.002/-0.003	2.756 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-80	0.315 -0.002/-0.003	3.150 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-90	0.315 -0.002/-0.003	3.543 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004
113.10-8-100	0.315 -0.002/-0.003	3.937 +0.024	0.37	1.06	0.52	0.33 ±0.04	1.055 -0.008	0.315 +0.004

Location
bore +0.004: 0.394

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-10-15	0.394 -0.002/-0.003	0.591 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394
113.10-10-20	0.394 -0.002/-0.003	0.787 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-25	0.394 -0.002/-0.003	0.984 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-30	0.394 -0.002/-0.003	1.181 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-35	0.394 -0.002/-0.003	1.378 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-40	0.394 -0.002/-0.003	1.575 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-45	0.394 -0.002/-0.003	1.772 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-50	0.394 -0.002/-0.003	1.969 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-60	0.394 -0.002/-0.003	2.362 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-70	0.394 -0.002/-0.003	2.756 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-80	0.394 -0.002/-0.003	3.150 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-90	0.394 -0.002/-0.003	3.543 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-100	0.394 -0.002/-0.003	3.937 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-110	0.394 -0.002/-0.003	4.331 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004
113.10-10-120	0.394 -0.002/-0.003	4.724 +0.024	0.47	1.06	0.52	0.39 ±0.04	1.055 -0.008	0.394 +0.004

Location
bore +0.004: 0.472

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-12-20	0.472 -0.002/-0.003	0.787 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472
113.10-12-25	0.472 -0.002/-0.003	0.984 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-30	0.472 -0.002/-0.003	1.181 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-35	0.472 -0.002/-0.003	1.378 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-40	0.472 -0.002/-0.003	1.575 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-45	0.472 -0.002/-0.003	1.772 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-50	0.472 -0.002/-0.003	1.969 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-60	0.472 -0.002/-0.003	2.362 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-70	0.472 -0.002/-0.003	2.756 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-80	0.472 -0.002/-0.003	3.150 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-90	0.472 -0.002/-0.003	3.543 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-100	0.472 -0.002/-0.003	3.937 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-110	0.472 -0.002/-0.003	4.331 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004
113.10-12-120	0.472 -0.002/-0.003	4.724 +0.024	0.57	1.22	0.65	0.43 ±0.04	1.287 -0.008	0.472 +0.004

Location
bore +0.004: 0.630

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-16-30	0.630 -0.002/-0.003	1.181 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630
113.10-16-35	0.630 -0.002/-0.003	1.378 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-40	0.630 -0.002/-0.003	1.575 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-45	0.630 -0.002/-0.003	1.772 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-50	0.630 -0.002/-0.003	1.969 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-60	0.630 -0.002/-0.003	2.362 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-70	0.630 -0.002/-0.003	2.756 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-80	0.630 -0.002/-0.003	3.150 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-90	0.630 -0.002/-0.003	3.543 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-100	0.630 -0.002/-0.003	3.937 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-110	0.630 -0.002/-0.003	4.331 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-120	0.630 -0.002/-0.003	4.724 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-130	0.630 -0.002/-0.003	5.118 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-140	0.630 -0.002/-0.003	5.512 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004
113.10-16-150	0.630 -0.002/-0.003	5.906 +0.024	0.75	1.50	0.92	0.57 ±0.04	1.677 -0.008	0.630 +0.004

Location
bore +0.004: 0.787

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-20-50	0.787 -0.002/-0.003	1.969 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787
113.10-20-60	0.787 -0.002/-0.003	2.362 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-70	0.787 -0.002/-0.003	2.756 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-80	0.787 -0.002/-0.003	3.150 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-90	0.787 -0.002/-0.003	3.543 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-100	0.787 -0.002/-0.003	3.937 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-110	0.787 -0.002/-0.003	4.331 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-120	0.787 -0.002/-0.003	4.724 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-130	0.787 -0.002/-0.003	5.118 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-140	0.787 -0.002/-0.003	5.512 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004
113.10-20-150	0.787 -0.002/-0.003	5.906 +0.024	0.98	1.50	0.92	0.69 ±0.04	1.677 -0.008	0.787 +0.004

Location
bore +0.004: 0.984

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-25-50	0.984 -0.002/-0.003	1.969 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984
113.10-25-60	0.984 -0.002/-0.003	2.362 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-70	0.984 -0.002/-0.003	2.756 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-80	0.984 -0.002/-0.003	3.150 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-90	0.984 -0.002/-0.003	3.543 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-100	0.984 -0.002/-0.003	3.937 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-110	0.984 -0.002/-0.003	4.331 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-120	0.984 -0.002/-0.003	4.724 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-130	0.984 -0.002/-0.003	5.118 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-140	0.984 -0.002/-0.003	5.512 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004
113.10-25-150	0.984 -0.002/-0.003	5.906 +0.024	1.21	1.97	1.20	0.88 ±0.04	2.138 -0.008	0.984 +0.004

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ -0.002/-0.003	l₁ +0.024															d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

0.197	0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	-	-	-	0.22	0.91	0.40	0.24	0.795	0.197
0.236	0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	-	-	-	0.28	0.91	0.40	0.28	0.795	0.236
0.315	0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	-	0.37	1.06	0.52	0.33	1.055	0.315
0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	0.47	1.06	0.52	0.39	1.055	0.394
0.472	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	-	0.57	1.22	0.65	0.43	1.287	0.472
0.630	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	5.118	5.512	5.906	0.75	1.50	0.92	0.57	1.677	0.630
0.787	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	5.118	5.512	5.906	-	-	-	-	0.98	1.50	0.92	0.69	1.677	0.787
0.984	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	5.118	5.512	5.906	-	-	-	-	1.21	1.97	1.20	0.88	2.138	0.984

Build & Price

Load Capacity of Ball Lock Pins

Information
The load capacities specified in the table for the double shear strength (breaking strength) have been calculated or theoretically determined in accordance with DIN 50141.

The endangered bolt cross-section S was considered in two shear planes until breakage, according to the sketch shown opposite.

The details given on load capacity are non-binding guide values without any liability. In general, they do not constitute a warranty of quality. The user must determine from case to case if a product is suitable for the application. Ambient influences may affect the specified values.

An appropriate safety factor must be taken into account in the design.

Load capacity F ≈ double shear strength according to DIN 50141 (breaking strength)

Show / Hide columns

d₁ Pin diameter	GN 113.10

5	5395 lbf (24 kN)
6	7868 lbf (35 kN)
8	14163 lbf (63 kN)
10	22481 lbf (100 kN)
12	32372 lbf (144 kN)
16	57776 lbf (257 kN)
20	90598 lbf (403 kN)
25	141854 lbf (631 kN)

Selected Part

Part Number

Total (net)

US$55.73

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	US$55.73
100	249	US$51.08
250	499	US$46.44
≥ 500		US$41.80

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.049 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

GN 113.10 Heavy Duty Ball Lock Pins Stainless Steel Grip, with Stainless Steel Shank AISI 630

Product Family Stainless Steel

Product description

Specification

Accessory

Part Options / Table

Location
bore +0.004: 0.197

Location
bore +0.004: 0.236

Location
bore +0.004: 0.315

Location
bore +0.004: 0.394

Location
bore +0.004: 0.472

Location
bore +0.004: 0.630

Location
bore +0.004: 0.787

Location
bore +0.004: 0.984

Metric

Build & Price

Load Capacity of Ball Lock Pins

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	d₄	l₂ ±0.04	l₃ -0.008	Location bore +0.004

113.10-5-10	0.197 -0.002/-0.003	0.394 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197
113.10-5-15	0.197 -0.002/-0.003	0.591 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-20	0.197 -0.002/-0.003	0.787 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-25	0.197 -0.002/-0.003	0.984 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-30	0.197 -0.002/-0.003	1.181 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-35	0.197 -0.002/-0.003	1.378 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-40	0.197 -0.002/-0.003	1.575 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-45	0.197 -0.002/-0.003	1.772 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-50	0.197 -0.002/-0.003	1.969 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-60	0.197 -0.002/-0.003	2.362 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-70	0.197 -0.002/-0.003	2.756 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004
113.10-5-80	0.197 -0.002/-0.003	3.150 +0.024	0.22	0.91	0.40	0.24 ±0.04	0.795 -0.008	0.197 +0.004

GN 113.10 Heavy Duty Ball Lock Pins Stainless Steel Grip, with Stainless Steel Shank AISI 630

Product Family Stainless Steel

Product description

Specification

Accessory

Part Options / Table

Location bore +0.004: 0.197

Location bore +0.004: 0.236

Location bore +0.004: 0.315

Location bore +0.004: 0.394

Location bore +0.004: 0.472

Location bore +0.004: 0.630

Location bore +0.004: 0.787

Location bore +0.004: 0.984

Metric

Build & Price

Load Capacity of Ball Lock Pins

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

Important: Price Adjustment Announcement

Location
bore +0.004: 0.197

Location
bore +0.004: 0.236

Location
bore +0.004: 0.315

Location
bore +0.004: 0.394

Location
bore +0.004: 0.472

Location
bore +0.004: 0.630

Location
bore +0.004: 0.787

Location
bore +0.004: 0.984