The cart is empty.

GN 124.2 Quick Release Pins Plastic Grip, with Stainless Steel Shank, with Axial Ball Retainer

GN 124.2 Plastic Quick Release Pins, with Stainless Steel Shank, with Axial Ball Retainer

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 124.2 Print This Page List of Lock Pin Types Load Rating Information Stainless Steel Characteristics Plastic Characteristics

Product description

Quick release pins GN 124.2 are used for rapid connecting and securing of components or workpieces.

The retaining balls are held in position by a compression spring, are not rigidly locked and therefore, the quick release pin can be quickly and easily inserted and removed from the location bore.

The technical section contains the load ratings for the double shear strength (breaking strength).

Specification

Shank pin
Stainless steel AISI 303

Knob
Plastic
Technopolymer (Polyamide PA)

Black-gray
Temperature resistant up to 176 °F (80 °C)

Balls
Stainless steel AISI 420C

Spring
Stainless steel AISI 631

RoHS

Accessory

Ball Chains GN 111
Ball Chains GN 111.5
Retaining Cables GN 111.2
Spiral Retaining Cables GN 111.4

Hide technical drawing

GN 124.2 Plastic Quick Release Pins, with Stainless Steel Shank, with Axial Ball Retainer sketch

Part Options / Table

Part Number	d₁ -0.001 / -0.003	l₁ + 0.023	d₂	d₃	k	l₂	l₃	Location bore	Axial holding force ≈

124.2-6-10	0.236 -0.001 / -0.003	0.394 + 0.023	1.02	0.69	0.26	0.87	0.20	0.24	1.80 lbf (8 N)
124.2-6-15	0.236 -0.001 / -0.003	0.591 + 0.023	1.02	0.69	0.26	0.87	0.20	0.24	1.80 lbf (8 N)
124.2-6-20	0.236 -0.001 / -0.003	0.787 + 0.023	1.02	0.69	0.26	0.87	0.20	0.24	1.80 lbf (8 N)
124.2-6-25	0.236 -0.001 / -0.003	0.984 + 0.023	1.02	0.69	0.26	0.87	0.20	0.24	1.80 lbf (8 N)
124.2-6-30	0.236 -0.001 / -0.003	1.181 + 0.023	1.02	0.69	0.26	0.87	0.20	0.24	1.80 lbf (8 N)
124.2-6-50	0.236 -0.001 / -0.003	1.969 + 0.023	1.02	0.69	0.26	0.87	0.20	0.24	1.80 lbf (8 N)
124.2-8-15	0.315 -0.001 / -0.003	0.591 + 0.023	1.02	0.69	0.34	0.87	0.25	0.31	3.37 lbf (15 N)
124.2-8-20	0.315 -0.001 / -0.003	0.787 + 0.023	1.02	0.69	0.34	0.87	0.25	0.31	3.37 lbf (15 N)
124.2-8-25	0.315 -0.001 / -0.003	0.984 + 0.023	1.02	0.69	0.34	0.87	0.25	0.31	3.37 lbf (15 N)
124.2-8-30	0.315 -0.001 / -0.003	1.181 + 0.023	1.02	0.69	0.34	0.87	0.25	0.31	3.37 lbf (15 N)
124.2-8-50	0.315 -0.001 / -0.003	1.969 + 0.023	1.02	0.69	0.34	0.87	0.25	0.31	3.37 lbf (15 N)
124.2-10-15	0.394 -0.001 / -0.003	0.591 + 0.023	1.34	0.91	0.47	1.12	0.34	0.39	6.74 lbf (30 N)
124.2-10-20	0.394 -0.001 / -0.003	0.787 + 0.023	1.34	0.91	0.47	1.12	0.34	0.39	6.74 lbf (30 N)
124.2-10-25	0.394 -0.001 / -0.003	0.984 + 0.023	1.34	0.91	0.47	1.12	0.34	0.39	6.74 lbf (30 N)
124.2-10-30	0.394 -0.001 / -0.003	1.181 + 0.023	1.34	0.91	0.47	1.12	0.34	0.39	6.74 lbf (30 N)
124.2-10-50	0.394 -0.001 / -0.003	1.969 + 0.023	1.34	0.91	0.47	1.12	0.34	0.39	6.74 lbf (30 N)
124.2-12-20	0.472 -0.001 / -0.003	0.787 + 0.023	1.34	0.91	0.57	1.12	0.37	0.47	7.19 lbf (32 N)
124.2-12-30	0.472 -0.001 / -0.003	1.181 + 0.023	1.34	0.91	0.57	1.12	0.37	0.47	7.19 lbf (32 N)
124.2-12-40	0.472 -0.001 / -0.003	1.575 + 0.023	1.34	0.91	0.57	1.12	0.37	0.47	7.19 lbf (32 N)
124.2-12-50	0.472 -0.001 / -0.003	1.969 + 0.023	1.34	0.91	0.57	1.12	0.37	0.47	7.19 lbf (32 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ -0.001 / -0.003	l₁ + 0.023						d₂	d₃	k	l₂	l₃	Location bore	Axial holding force ≈

0.236	0.394	0.591	0.787	0.984	1.181	1.969	1.02	0.69	0.26	0.87	0.20	0.24	1.80 lbf (8 N)
0.315	0.591	0.787	0.984	1.181	1.969	-	1.02	0.69	0.34	0.87	0.25	0.31	3.37 lbf (15 N)
0.394	0.591	0.787	0.984	1.181	1.969	-	1.34	0.91	0.47	1.12	0.34	0.39	6.74 lbf (30 N)
0.472	0.787	1.181	1.575	1.969	-	-	1.34	0.91	0.57	1.12	0.37	0.47	7.19 lbf (32 N)

Build & Price

Load Capacity of Quick Release Pins

Information
The load capacities specified in the table for the double shear strength (breaking strength) have been calculated or theoretically determined in accordance with DIN 50141.

The endangered bolt cross-section S was considered in two shear planes until breakage, according to the sketch shown opposite.

The details given on load capacity are non-binding guide values without any liability. In general, they do not constitute a warranty of quality. The user must determine from case to case if a product is suitable for the application. Ambient influences may affect the specified values.

An appropriate safety factor must be taken into account in the design.

Load capacity F ≈ double shear strength according to DIN 50141 (breaking strength)

Show / Hide columns

d₁ Pin diameter	GN 124.2

6	4946 lbf (22 kN)
8	8992 lbf (40 kN)
10	13938 lbf (62 kN)
12	20233 lbf (90 kN)

Selected Part

Part Number

Total (net)

US$20.40

In Stock: 9

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	US$20.40
100	249	US$18.70
250	499	US$17.00
≥ 500		US$15.30

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.029 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.