You are here: Product Overview > 3.3 Hinging, Latching, Locking of Doors and Covers > Latches, Locks with Indexing Function > GN 4490 Ball Catches previous product next product

Because of a web page matching your requested link is no longer valid. You have been automatically redirected to the new link.

GN 4490 Ball Catches Zinc Die-Cast

Photo

Color: SW - Black, RAL 9005, textured finish

GN 4490 Zinc Die-Cast Ball Catches Color: SR - Silver, RAL 9006, textured finish

Accessories for Profile Systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Winco standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show All Compatible Products

Standard Sheet GN 4490 Print This Page Overview of Appropriate Series for GN 965 T-Nut Assemblies Overview of Appropriate Series for GN 968 T-Nut Assemblies Stainless Steel Characteristics

Product description

Information

GN 4490 ball catches are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily.

The ball catches consist of a ball housing and a retaining element that engages in the ball housing from the side or front. The installation orientation can be chosen as desired.

Beyond the typical uses, these solid and attractively designed ball catches are also utilized in technical environments. When used with profile systems, the slot width n may not be larger than listed in the table.

Specification

Ball housing / retaining element
Zinc die-castZD
Powder coated
Black, RAL 9005, textured finishSW
Silver, RAL 9006, textured finishSR

Ball
Stainless steel 420C

Spring
Stainless steel AISI 301

Ball guide
Plastic (Polyacetal POM)

RoHS

On request

Other colors

Technical drawing

GN 4490 Zinc Die-Cast Ball Catches sketch

Hide technical drawing

Part Options / Table

Identification no.

1	Standard holding force
2	High holding force

Part Number SW	Part Number SR	l₁	a₁	a₂	b₁	b₂	b₃	d For screw thread	h	l₂	m₁	m₂	s₁	s₂	For slot width n	Holding force F_H ≈ Identification no. 1	Identification no. 2

4490-ZD-38-1-SW	4490-ZD-38-1-SR	1.50	0.59	0.30	0.31	0.28	0.17	M 3	0.30	0.83	1.18	0.47	0.16	0.10	≤ 4.5	5.62 lbf (25 N)	-
4490-ZD-50-1-SW	4490-ZD-50-1-SR	1.97	0.79	0.41	0.47	0.39	0.26	M 4	0.37	1.18	1.57	0.67	0.20	0.14	≤ 6	8.99 lbf (40 N)	-
4490-ZD-68-1-SW	4490-ZD-68-1-SR	2.68	0.91	0.47	0.57	0.43	0.37	M 4	0.43	1.28	2.17	0.79	0.20	0.14	≤ 8	16.86 lbf (75 N)	-
4490-ZD-80-1-SW	4490-ZD-80-1-SR	3.15	1.06	0.55	0.65	0.51	0.43	M 5	0.51	1.57	2.56	0.98	0.24	0.16	≤ 10	28.10 lbf (125 N)	-

Part Number SW	Part Number SR	l₁	a₁	a₂	b₁	b₂	b₃	d For screw thread	h	l₂	m₁	m₂	s₁	s₂	For slot width n	Holding force F_H ≈ Identification no. 1	Identification no. 2

4490-ZD-38-2-SW	4490-ZD-38-2-SR	1.50	0.59	0.30	0.31	0.28	0.17	M 3	0.30	0.83	1.18	0.47	0.16	0.10	≤ 4.5	-	7.87 lbf (35 N)
4490-ZD-50-2-SW	4490-ZD-50-2-SR	1.97	0.79	0.41	0.47	0.39	0.26	M 4	0.37	1.18	1.57	0.67	0.20	0.14	≤ 6	-	15.74 lbf (70 N)
4490-ZD-68-2-SW	4490-ZD-68-2-SR	2.68	0.91	0.47	0.57	0.43	0.37	M 4	0.43	1.28	2.17	0.79	0.20	0.14	≤ 8	-	22.48 lbf (100 N)
4490-ZD-80-2-SW	4490-ZD-80-2-SR	3.15	1.06	0.55	0.65	0.51	0.43	M 5	0.51	1.57	2.56	0.98	0.24	0.16	≤ 10	-	33.72 lbf (150 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

l₁	a₁	a₂	b₁	b₂	b₃	d For screw thread	h	l₂	m₁	m₂	s₁	s₂	For slot width n	Holding force F_H ≈ Identification no. 1	Identification no. 2

1.50	0.59	0.30	0.31	0.28	0.17	M 3	0.30	0.83	1.18	0.47	0.16	0.10	≤ 4.5	5.62 lbf (25 N)	7.87 lbf (35 N)
1.97	0.79	0.41	0.47	0.39	0.26	M 4	0.37	1.18	1.57	0.67	0.20	0.14	≤ 6	8.99 lbf (40 N)	15.74 lbf (70 N)
2.68	0.91	0.47	0.57	0.43	0.37	M 4	0.43	1.28	2.17	0.79	0.20	0.14	≤ 8	16.86 lbf (75 N)	22.48 lbf (100 N)
3.15	1.06	0.55	0.65	0.51	0.43	M 5	0.51	1.57	2.56	0.98	0.24	0.16	≤ 10	28.10 lbf (125 N)	33.72 lbf (150 N)

Build & Price

3D Product Configurator

Material

ZD - Zinc die-cast

Length l₁

1.50

1.97

2.68

3.15

Identification no.

1 - Standard holding force

2 - High holding force

Color

SR - Silver, RAL 9006, textured finish

SW - Black, RAL 9005, textured finish

Selected Part

Part Number

Total US Dollars (net)

$6.58

In Stock: 91

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	$6.58
100	249	$6.03
250	499	$5.48
≥ 500		$4.93

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.027 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.