The cart is empty.

GN 2290 Hinge Pin Sets Plastic, for Hinge Leafs GN 2291

Identification no.: 1 - For double leaf hinges

Standard Sheet GN 2290 Print This Page Mounting Information Operating Instruction for GN 2290 Plastic Characteristics

Product description

Hinge pin sets GN 2290 are designed as components for hinge wings GN 2291 for mounting individual hinge versions.

Hinge pin sets with identification no. 1 are designed for double leaf hinges, while hinge pin sets with identification no. 2 and 3 are designed for three leaf hinges. Hinge pin sets with identification no. 2 are used exclusively for short middle leafs with a length of 40 mm. For extended middle leafs, identification no. 3 has to be used.

Specification

Bearing bushing / cover cap
Plastic
Technopolymer (Polyamide PA)
Graphite gray, RAL 7024GR

Tapered dowel pin ISO 8741
Steel, zinc plated, blue passivated finish

RoHS

GN 2290 Plastic Hinge Pin Sets, for Hinge Leafs GN 2291 sketch

Hide technical drawing

Part Options / Table

Identification no.

1	For double leaf hinges
2	For triple leaf hinges, with short middle leaf
3	For triple leaf hinges, with extended middle leaf

Part Number	d₁	d₂	d₃ ± 0.008	d₄	d₅	l₁	l₂	l₃	l₄	l₅	l₆	l₇

2290-1-GR	0.24	0.24	0.547 ± 0.008	0.31	0.31	2.36	1.97	1.30	0.04	0.79	0.30	0.06
2290-2-GR	0.24	0.24	0.547 ± 0.008	0.31	0.31	2.36	1.97	1.30	0.04	0.79	0.30	0.06
2290-3-GR	0.24	0.24	0.547 ± 0.008	0.31	0.31	2.36	1.97	1.30	0.04	0.79	0.30	0.06

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂	d₃ ± 0.008	d₄	d₅	l₁	l₂	l₃	l₄	l₅	l₆	l₇

0.24	0.24	0.547	0.31	0.31	2.36	1.97	1.30	0.04	0.79	0.30	0.06

Build & Price

Identification no.

1 - For double leaf hinges

2 - For triple leaf hinges, with short middle leaf

3 - For triple leaf hinges, with extended middle leaf

Color

GR - Graphite gray, RAL 7024

Mounting Information


							Left / right hinges Right or left hinges can be created by the direction in which the bearing bushings are inserted into the hinge leaf.
							Mounting on door frames For mounting a door that should be removable, two hinges of the same type must be attached to the door frame. If the door is not supposed to be removable, the door must be mounted with at least one right hinge and one left hinge.
							Assembly Position the bearing bushing with the desired installation direction on the hinge leaf. Then insert a screw with a collar such as an ISO 7380 oval head screw into the bearing bushing to protect the bearing bushing collar from damage while hammering in. Hammer in the bearing bushing until about 1 mm remains between the bearing bushing collar and the hinge wing. Remove the burr on the bearing bushing using a knife. Hammer in the bearing bushing all the way. Remove the screw. Hammer a tapered dowel pin into the bearing bushing. Place the cover cap on the opposite side of the hinge wing. Insert the other bearing bushings according to points 1 to 5.

Selected Part

Part Number

Total (net)

US$3.80

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	US$3.80
100	249	US$3.49
250	499	US$3.17
≥ 500		US$2.85

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.035 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.