The cart is empty.

GN 5345.4 Three-Lobed Knobs Stainless Steel AISI 316L, with Tapped or Plain Bore

Type: E - With tapped blind bore

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 5345.4 Print This Page Stainless Steel Characteristics Cross Holes GN 110 ISO Fundamental Tolerances

Product description

Three-lobed knobs GN 5345.4 have a smooth and sealed surface.

They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied.

Specification

Stainless steel AISI 316L
Matte shot-blasted finish

RoHS

On request

Highly polished finish (only Type D and E)
Other modifications such as inch or metric tapped holes, blind or through bores, cross holes, set screw holes and threaded studs

Hide technical drawing

GN 5345.4 Stainless Steel AISI 316L Three-Lobed Knobs, with Tapped or Plain Bore sketch

Part Options / Table

Type

E	With tapped blind bore
D	With tapped through bore
C	With plain blind bore, tol. H7

Type: E - With tapped blind bore

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁	d₂ Thread Type E / Type D	d₃ +0.001 Bore Type C	d₄	h₁	h₂	t₁ min.	t₂

5345.4-25-10X24-E	0.98	10 x 24	-	0.47	0.63	0.31	0.39	0.43
5345.4-32-1/4X20-E	1.26	1/4 x 20	-	0.59	0.83	0.43	0.47	0.51
5345.4-40-1/4X20-E	1.57	1/4 x 20	-	0.71	1.02	0.59	0.47	0.51
5345.4-40-5/16X18-E	1.57	5/16 x 18	-	0.71	1.02	0.59	0.59	0.51
5345.4-50-5/16X18-E	1.97	5/16 x 18	-	0.83	1.18	0.67	0.59	0.63
5345.4-50-3/8X16-E	1.97	3/8 x 16	-	0.83	1.18	0.67	0.71	0.63
5345.4-60-3/8X16-E	2.36	3/8 x 16	-	0.98	1.38	0.71	0.71	0.79
5345.4-60-1/2X13-E	2.36	1/2 x 13	-	0.98	1.38	0.71	0.87	0.79
5345.4-25-M5-E	0.98	M 5	-	0.47	0.63	0.31	0.39	0.43
5345.4-32-M6-E	1.26	M 6	-	0.59	0.83	0.43	0.47	0.51
5345.4-40-M6-E	1.57	M 6	-	0.71	1.02	0.59	0.47	0.51
5345.4-40-M8-E	1.57	M 8	-	0.71	1.02	0.59	0.59	0.51
5345.4-50-M8-E	1.97	M 8	-	0.83	1.18	0.67	0.59	0.63
5345.4-50-M10-E	1.97	M 10	-	0.83	1.18	0.67	0.71	0.63
5345.4-60-M10-E	2.36	M 10	-	0.98	1.38	0.71	0.71	0.79
5345.4-60-M12-E	2.36	M 12	-	0.98	1.38	0.71	0.87	0.79

Type: D - With tapped through bore

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁	d₂ Thread Type E / Type D	d₃ +0.001 Bore Type C	d₄	h₁	h₂	t₁ min.	t₂

5345.4-25-10X24-D	0.98	10 x 24	-	0.47	0.63	0.31	0.39	0.43
5345.4-32-1/4X20-D	1.26	1/4 x 20	-	0.59	0.83	0.43	0.47	0.51
5345.4-40-1/4X20-D	1.57	1/4 x 20	-	0.71	1.02	0.59	0.47	0.51
5345.4-40-5/16X18-D	1.57	5/16 x 18	-	0.71	1.02	0.59	0.59	0.51
5345.4-50-5/16X18-D	1.97	5/16 x 18	-	0.83	1.18	0.67	0.59	0.63
5345.4-50-3/8X16-D	1.97	3/8 x 16	-	0.83	1.18	0.67	0.71	0.63
5345.4-60-3/8X16-D	2.36	3/8 x 16	-	0.98	1.38	0.71	0.71	0.79
5345.4-60-1/2X13-D	2.36	1/2 x 13	-	0.98	1.38	0.71	0.87	0.79
5345.4-25-M5-D	0.98	M 5	-	0.47	0.63	0.31	0.39	0.43
5345.4-32-M6-D	1.26	M 6	-	0.59	0.83	0.43	0.47	0.51
5345.4-40-M6-D	1.57	M 6	-	0.71	1.02	0.59	0.47	0.51
5345.4-40-M8-D	1.57	M 8	-	0.71	1.02	0.59	0.59	0.51
5345.4-50-M8-D	1.97	M 8	-	0.83	1.18	0.67	0.59	0.63
5345.4-50-M10-D	1.97	M 10	-	0.83	1.18	0.67	0.71	0.63
5345.4-60-M10-D	2.36	M 10	-	0.98	1.38	0.71	0.71	0.79
5345.4-60-M12-D	2.36	M 12	-	0.98	1.38	0.71	0.87	0.79

Type: C - With plain blind bore, tol. H7

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁	d₂ Thread Type E / Type D	d₃ +0.001 Bore Type C	d₄	h₁	h₂	t₁ min.	t₂

5345.4-40-B5/16-C	1.57	-	B 5/16 +0.001	0.71	1.02	0.59	0.59	0.51
5345.4-50-B3/8-C	1.97	-	B 3/8 +0.001	0.83	1.18	0.67	0.71	0.63
5345.4-60-B1/2-C	2.36	-	B 1/2 +0.001	0.98	1.38	0.71	0.87	0.79
5345.4-40-B8-C	1.57	-	B 8 +0.001	0.71	1.02	0.59	0.59	0.51
5345.4-50-B10-C	1.97	-	B 10 +0.001	0.83	1.18	0.67	0.71	0.63
5345.4-60-B12-C	2.36	-	B 12 +0.001	0.98	1.38	0.71	0.87	0.79

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁	d₂ Thread Type E / Type D	d₃ +0.001 Bore Type C	d₄	h₁	h₂	t₁ min.	t₂

0.98	10 x 24	-	0.47	0.63	0.31	0.39	0.43
1.26	1/4 x 20	-	0.59	0.83	0.43	0.47	0.51
1.57	1/4 x 20	-	0.71	1.02	0.59	0.47	0.51
1.57	5/16 x 18	B 5/16	0.71	1.02	0.59	0.59	0.51
1.97	5/16 x 18	-	0.83	1.18	0.67	0.59	0.63
1.97	3/8 x 16	B 3/8	0.83	1.18	0.67	0.71	0.63
2.36	3/8 x 16	-	0.98	1.38	0.71	0.71	0.79
2.36	1/2 x 13	B 1/2	0.98	1.38	0.71	0.87	0.79

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ Thread Type E / Type D	d₃ +0.001 Bore Type C	d₄	h₁	h₂	t₁ min.	t₂

0.98	M 5	-	0.47	0.63	0.31	0.39	0.43
1.26	M 6	-	0.59	0.83	0.43	0.47	0.51
1.57	M 6	-	0.71	1.02	0.59	0.47	0.51
1.57	M 8	B 8	0.71	1.02	0.59	0.59	0.51
1.97	M 8	-	0.83	1.18	0.67	0.59	0.63
1.97	M 10	B 10	0.83	1.18	0.67	0.71	0.63
2.36	M 10	-	0.98	1.38	0.71	0.71	0.79
2.36	M 12	B 12	0.98	1.38	0.71	0.87	0.79

Build & Price

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ H11	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total (net)

US$27.89

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	US$27.89
100	249	US$25.56
250	499	US$23.24
≥ 500		US$20.92

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.041 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.