You are here: Product Overview > 3.1 Indexing, Locking, Blocking with Pins and Ball-Shaped Elements > Indexing Plungers > GN 724.6 Indexing Plungers previous product next product

GN 724.6 Indexing Plungers Steel / Stainless Steel, with Chamfered Pin, with Mounting Flange

Photo

GN 724.6 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C1 - Chamfer, top
Material / Finish: ZB - Zinc plated, blue passivated finish
Identification no.: 1 - Without receiver

Type: C1 - Chamfer, top
Material / Finish: ZB - Zinc plated, blue passivated finish
Identification no.: 1 - Without receiver

GN 724.6 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C1 - Chamfer, top
Material / Finish: NI - Stainless steel precision casting
Identification no.: 1 - Without receiver

GN 724.6 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C2 - Chamfer, bottom
Material / Finish: SW - Black, RAL 9005, textured finish
Identification no.: 2 - With receiver

GN 724.6 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C4 - Chamfer, left
Material / Finish: NI - Stainless steel precision casting
Identification no.: 1 - Without receiver

GN 724.6 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C4 - Chamfer, left
Material / Finish: SW - Black, RAL 9005, textured finish
Identification no.: 2 - With receiver

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 724.6 Print This Page List of Indexing Plunger Types Stainless Steel Characteristics

Product description

Information

Indexing plungers GN 724.6 have a plunger pin with square cross-section, a latching surface on one side and a chamfer on the other. When the object to be secured moves towards the chamfer, the plunger pin is pushed back into the guide, allowing grooves and edges to pass over the pin. The plunger pin engages automatically in the direction of the latching surface.

The latching can be released by pulling the pull ring by hand or with a cable or pull rod using a hook. The types with lock-out are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the plunger pin has been retracted. The ring is held in this position by the catch recess at the top of the guide.

The dimensional tolerances between the pin and the guide have been chosen to ensure functional reliability even in roughly dimensioned applications or in the event of soiling.

For fastening, slotted or hex mounting holes allow the use of socket cap screws DIN 912 and hex head screws or nuts according to DIN 931 or DIN 934.

Specification

Guide / Counter piece
Steel precision casting

Zinc plated, blue passivated finishZB
Zinc plated and powder coated
Black, RAL 9005, textured finishSW
Stainless steel precision castingNI AISI CF-8

Pull ring
Steel precision casting
Zinc plated, blue passivated finish (for ZB and SW)
Stainless steel precision casting AISI CF-8 (for NI)

Plunger pin
Steel, hardened
Zinc plated, blue passivated finish (for ZB and SW)
Stainless steel AISI 431, hardened (for NI)

Compression spring
Stainless steel AISI 316Ti

RoHS

Technical drawing

GN 724.6 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange sketch

Hide technical drawing

Part Options / Table

Type

C1	Chamfer, top
C2	Chamfer, bottom
C3	Chamfer, right
C4	Chamfer, left

Identification no.

1	Without receiver
2	With receiver

Part Number 1 - Without receiver	Part Number 2 - With receiver	b₁	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C1-ZB-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C1-SW-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C1-NI-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C1-ZB-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C1-SW-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C1-NI-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C1-ZB-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C1-SW-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C1-NI-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C1-ZB-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C1-SW-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C1-NI-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number 1 - Without receiver	Part Number 2 - With receiver	b₁	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C2-ZB-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C2-SW-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C2-NI-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C2-ZB-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C2-SW-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C2-NI-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C2-ZB-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C2-SW-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C2-NI-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C2-ZB-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C2-SW-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C2-NI-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number 1 - Without receiver	Part Number 2 - With receiver	b₁	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C3-ZB-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C3-SW-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C3-NI-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C3-ZB-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C3-SW-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C3-NI-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C3-ZB-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C3-SW-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C3-NI-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C3-ZB-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C3-SW-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C3-NI-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number 1 - Without receiver	Part Number 2 - With receiver	b₁	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C4-ZB-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C4-SW-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C4-NI-1		0.51	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C4-ZB-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C4-SW-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C4-NI-2	0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C4-ZB-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C4-SW-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C4-NI-1		0.79	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C4-ZB-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C4-SW-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C4-NI-2	0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

b₁	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

0.51	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
0.79	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Show / Hide columns

Dimensions in: Inch (change to Metric)

b₁	s	b₂ +0.012	d₃ +0.008	h₂	h₃	k₂	k₃	k₄	k₅	k₆	k₇	m	A/F

0.51	0.79	0.256	0.240	0.30	0.06	0.30	0.71	0.47	0.75	0.10	0.06	1.34	0.39
0.79	1.18	0.394	0.398	0.55	0.20	0.55	1.34	0.39	1.08	0.12	0.08	2.17	0.67

Build & Price

3D Product Configurator

Application Examples

Selected Part

Part Number

Total US Dollars (net)

$27.11

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	24	$27.11
25	49	$24.85
50	99	$22.60
≥ 100		$20.34

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.410 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team