The cart is empty.

GN 648.2 Rod End Bearings Steel, with Threaded Stem

Type: N - Brass / steel, lubrication possible

Standard Sheet GN 648.2 Print This Page Further Information on Rod End Bearings as well as Load Values, Page 1 Further Information on Spherical Plain Bearings as well as Load Values, Page 2 ISO Fundamental Tolerances

Product description

Rod end bearings GN 648.2 are a mechanical articulating joint that transmit traction and thrust from linkages and lever arms and are resistant to wear, especially under high alternating loads and impact in a radial / axial direction. Rod end bearing are used on the ends of control rods, steering links and tie rods.

Specification

Housing
Steel, zinc plated, blue passivated finish

d₁ = 5 to 12 mm: turned
d₁ = 14 to 25: forged

Pairings

Type N (lubrication possible)
Bearing socket
Brass, CuZn40Al1

Internal ring
Steel, 100Cr6
Hardened, ground, polished

Type W (self-lubricating)
Bearing socket
Steel, zinc plated
With PTFE insert

Internal ring
Steel, 100Cr6
Hardened, ground, polished

RoHS

On request

Narrow model (ISO 12240-1, series E)

GN 648.2 Steel Rod End Bearings, with Threaded Stem sketch

Hide technical drawing

Part Options / Table

Type (Pairings)

N	Brass / steel, lubrication possible
W	Steel PTFE / steel, self lubricated

Part Number	d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	b₁ -0.005	b₂	d₃	d₄	l₁	l₂	l₃

648.2-5-M5L-N	0.197 +0.001	M 5L	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.2-5-M5-N	0.197 +0.001	M 5	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.2-6-M6L-N	0.236 +0.001	M 6L	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.2-6-M6-N	0.236 +0.001	M 6	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.2-8-M8L-N	0.315 +0.001	M 8L	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.2-8-M8-N	0.315 +0.001	M 8	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.2-10-M10L-N	0.394 +0.001	M 10L	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.2-10-M10-N	0.394 +0.001	M 10	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.2-12-M12L-N	0.472 +0.001	M 12L	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.2-12-M12-N	0.472 +0.001	M 12	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.2-14-M14L-N	0.551 +0.001	M 14L	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.2-14-M14-N	0.551 +0.001	M 14	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.2-16-M16L-N	0.630 +0.001	M 16L	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.2-16-M16-N	0.630 +0.001	M 16	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.2-18-M18X1.5L-N	0.709 +0.001	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.2-18-M18X1.5-N	0.709 +0.001	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.2-20-M20X1.5L-N	0.787 +0.001	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.2-20-M20X1.5-N	0.787 +0.001	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.2-22-M22X1.5L-N	0.866 +0.001	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.2-22-M22X1.5-N	0.866 +0.001	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.2-25-M24X2L-N	0.984 +0.001	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.2-25-M24X2-N	0.984 +0.001	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°

Part Number	d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	b₁ -0.005	b₂	d₃	d₄	l₁	l₂	l₃

648.2-5-M5L-W	0.197 +0.001	M 5L	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.2-5-M5-W	0.197 +0.001	M 5	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.2-6-M6L-W	0.236 +0.001	M 6L	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.2-6-M6-W	0.236 +0.001	M 6	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.2-8-M8L-W	0.315 +0.001	M 8L	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.2-8-M8-W	0.315 +0.001	M 8	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.2-10-M10L-W	0.394 +0.001	M 10L	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.2-10-M10-W	0.394 +0.001	M 10	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.2-12-M12L-W	0.472 +0.001	M 12L	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.2-12-M12-W	0.472 +0.001	M 12	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.2-14-M14L-W	0.551 +0.001	M 14L	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.2-14-M14-W	0.551 +0.001	M 14	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.2-16-M16L-W	0.630 +0.001	M 16L	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.2-16-M16-W	0.630 +0.001	M 16	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.2-18-M18X1.5L-W	0.709 +0.001	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.2-18-M18X1.5-W	0.709 +0.001	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.2-20-M20X1.5L-W	0.787 +0.001	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.2-20-M20X1.5-W	0.787 +0.001	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.2-22-M22X1.5L-W	0.866 +0.001	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.2-22-M22X1.5-W	0.866 +0.001	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.2-25-M24X2L-W	0.984 +0.001	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.2-25-M24X2-W	0.984 +0.001	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.2-30-M30X2L-W	1.181 +0.001	M 30 x 2L	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°
648.2-30-M30X2-W	1.181 +0.001	M 30 x 2	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	b₁ -0.005	b₂	d₃	d₄	l₁	l₂	l₃	w Max. tilting angle

0.197**	M 5	M 5L	0.315	0.24	0.30	0.71	1.30	1.65	0.79	13°
0.236	M 6	M 6L	0.354	0.27	0.35	0.79	1.42	1.81	0.87	13°
0.315	M 8	M 8L	0.472	0.35	0.41	0.94	1.65	2.13	0.98	14°
0.394	M 10	M 10L	0.551	0.41	0.51	1.10	1.89	2.44	1.14	13°
0.472	M 12	M 12L	0.630	0.47	0.61	1.26	2.13	2.76	1.30	13°
0.551	M 14	M 14L	0.748	0.53	0.66	1.42	2.36	3.07	1.50	16°
0.630	M 16	M 16L	0.827	0.59	0.76	1.65	2.60	3.43	1.57	15°
0.709	M 18 x 1.5	M 18 x 1.5L	0.906	0.65	0.86	1.81	2.83	3.74	1.73	15°
0.787	M 20 x 1.5	M 20 x 1.5L	0.984	0.71	0.96	1.97	3.07	4.06	1.85	14°
0.866	M 22 x 1.5	M 22 x 1.5L	1.102	0.79	1.02	2.13	3.31	4.37	2.01	15°
0.984	M 24 x 2	M 24 x 2L	1.220	0.87	1.17	2.36	3.70	4.88	2.28	15°
1.181*	M 30 x 2	M 30 x 2L	1.457	0.98	1.37	2.76	4.33	5.71	2.80	17°