Flanged Linear Actuator Connectors GN 146.15

Photo

Type: B - With seals

GN 146.15 Stainless Steel Flanged Linear Actuator Connectors, with 4 Mounting Holes Type: A - Without seals

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product description

Information

Flanged linear actuator connectors GN 146.15 are based on flanged connector clamps. The additionally provided mounting holes are used to connect to the drive key of a linear actuator. Bores with the designation G are equipped with sleeve bearings.

With the screw location z, the play of the guide bores d₁ can be adjusted or the linear actuator connectors can be clamped after adjustment. Type B is equipped with seals at the screw locations.

For quick clamping without tools, the cap nut can be replaced by the adjustable levers GN 911.3 listed in the table as accessories.

Specification

Body
Stainless steel AISI CF-8
Matte shot-blasted

Sleeve bearing
Plastic (PTFE)

Carriage bolt DIN 603
Stainless steel A2

Cap nuts DIN 917 / washers
Stainless steel A2

Seals

Sealing disks
Plastic (Polyacetal POM)
Spacer ring
Silicon, 40 ... 60 Shore A

RoHS

Build & Price

Part Number	d₁ Bore with sleeve bearing	b	d₂	d₃	d₄ Mounting screws on the drive key	k Clamping length	l₁	m	t	x₁	x₂	y₁	y₂	z Screw location for screw size	Accessory Recom. lever GN 911.3 for z l₂

146.15-G30-A-4	G 30	0.87	0.26	1.46	M 4	1.57	2.60	1.18	0.28	2.05	1.38	2.76	2.09	M 8	2.48	3.07
146.15-G50-A-4	G 50	1.18	0.42	2.36	M 6	2.56	3.88	1.97	0.35	3.62	2.44	5.04	3.86	M 10	3.07	3.62

Part Number	d₁ Bore with sleeve bearing	b	d₂	d₃	d₄ Mounting screws on the drive key	k Clamping length	l₁	m	t	x₁	x₂	y₁	y₂	z Screw location for screw size	Accessory Recom. lever GN 911.3 for z l₂

146.15-G30-B-4	G 30	0.87	0.26	1.46	M 4	1.57	2.60	1.18	0.28	2.05	1.38	2.76	2.09	M 8	2.48	3.07
146.15-G50-B-4	G 50	1.18	0.42	2.36	M 6	2.56	3.88	1.97	0.35	3.62	2.44	5.04	3.86	M 10	3.07	3.62

d₁ Bore with sleeve bearing	b	d₂	d₃	d₄ Mounting screws on the drive key	k Clamping length	l₁	m	t	x₁	x₂	y₁	y₂	z Screw location for screw size	Accessory Recom. lever GN 911.3 for z l₂

G 30	0.87	0.26	1.46	M 4	1.57	2.60	1.18	0.28	2.05	1.38	2.76	2.09	M 8	2.48	3.07
G 50	1.18	0.42	2.36	M 6	2.56	3.88	1.97	0.35	3.62	2.44	5.04	3.86	M 10	3.07	3.62

3D Product Configurator

Bore d₁

G 30

G 50

Type

A - Without seals

B - With seals

Identification no.

4 - With stainless steel cap nut DIN 917

Selected Part

Part Number

Total US Dollars (net)

$159.01

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	9	$159.01
10	24	$145.76
25	49	$132.51
≥ 50		$119.25

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.595 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.