Swivel Linear Actuator Connectors GN 273.1

Product description

Information

Swivel linear actuator connectors GN 273.1 are based on swivel clamp connectors. The additionally provided mounting holes are used to connect to the drive key of a linear actuator. Bores with the designation “G” are equipped with sleeve bearings.

With the screw location z, the play of the guide bore d₁ can be adjusted or the linear actuator connectors can be clamped after adjustment.

For quick clamping without tools, the socket cap screw can be replaced by the adjustable lever GN 911 listed in the table as accessory.

Specification

Body
Aluminum
Powder coated
Black, RAL 9005, textured finishSW

Sleeve bearing
Plastic (PTFE)

Socket cap screws DIN 912
Stainless steel AISI 304

Hex nuts DIN 985
Stainless steel AISI 304
Self-locking via polyamide ring

RoHS

Accessory

Adjustable Levers GN 911

On request

Inch size bores

Build & Price

Part Number	d₁ Bore Without sleeve bearing	With sleeve bearing	b Swivel width	d₂	d₃ Mounting screws on the drive key	k Clamping length	l₁	m	s	t	z Screw location for screw size	Accessory Recom. lever GN 911 for z l₂

273.1-B18-2-SW	B 18	-	0.98	0.26	M 3	0.98	2.52	1.16	0.39	0.49	M6-20	1.77	2.48
273.1-G18-2-SW	-	G 18	0.98	0.26	M 3	0.98	2.52	1.16	0.39	0.49	M6-20	1.77	2.48

d₁ Bore Without sleeve bearing	With sleeve bearing	b Swivel width	d₂	d₃ Mounting screws on the drive key	k Clamping length	l₁	m	s	t	z Screw location for screw size	Accessory Recom. lever GN 911 for z l₂

B 18	G 18	0.98	0.26	M 3	0.98	2.52	1.16	0.39	0.49	M6-20	1.77	2.48

3D Product Configurator

Bore d₁

B 18

Bore d₁

G 18

Identification no.

2 - With stainless steel socket cap screw DIN 912

Finish

SW - Black, RAL 9005, textured finish

Selected Part

Part Number

Total US Dollars (net)

$46.99

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	9	$46.99
10	24	$43.07
25	49	$39.16
≥ 50		$35.24

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.121 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.