The cart is empty.

DIN 469 Straight Crank Handles Cast Iron, with Fixed or Revolving Handle, with Round or Square Bore

Bore: V - With square
Type: D - With revolving handle

Standard Sheet DIN 469 Print This Page Cross Holes GN 110 Square Bores WN 79 ISO Fundamental Tolerances

Product description

Straight crank handles DIN 469 are available with steel hand pieces as standard. If plastic hand pieces are required, please specify when ordering.

Specification

Crank body
Cast iron (GGG)

Powder coated
Black, textured finish
Contact face of hub machined

Fixed handle DIN 39 for Type F
Steel
Zinc plated, blue passivated finish

Revolving handle DIN 98 for Type D
Steel
Zinc plated, blue passivated finish

RoHS

On request

Other modifications such as inch and special metric bores, squares, keyways, set screw holes, etc.

DIN 469 Cast Iron Straight Crank Handles, with Fixed or Revolving Handle, with Round or Square Bore sketch

Hide technical drawing

Part Options / Table

Type

F	With fixed handle
D	With revolving handle

Part Number F - With fixed handle	Part Number D - With revolving handle	Length l	s H11 Square	e min. (Column 1)	(Column 2)	d₁ H7 Bore	d₂	h₁	h₂	h₃ ≈	h₄ ≈ Type D	Type F	Ø Handle


10QC14/F	10QC14/D	2.48	V 10 H11	0.52	-	-	0.79	0.79	0.43	0.59	2.15	1.97	0.63
8MC15/F	8MC15/D	3.15	-	-	-	B 8 H7	0.94	0.94	0.51	0.71	2.40	2.20	0.71
10QC15/F	10QC15/D	3.15	V 10 H11	0.52	-	-	0.94	0.94	0.51	0.71	2.40	2.20	0.71
12QC15/F	12QC15/D	3.15	V 12 H11	-	0.63	-	0.94	0.94	0.51	0.71	2.40	2.20	0.71
10MC16/F	10MC16/D	3.94	-	-	-	B 10 H7	1.10	1.10	0.51	0.83	2.64	2.52	0.79
12QC16/F	12QC16/D	3.94	V 12 H11	0.63	-	-	1.10	1.10	0.51	0.83	2.64	2.52	0.79
14QC16/F	14QC16/D	3.94	V 14 H11	-	0.71	-	1.10	1.10	0.51	0.83	2.64	2.52	0.79
10MC17/F	10MC17/D	4.92	-	-	-	B 10 H7	1.34	1.34	0.55	1.02	2.99	2.83	0.87
14QC17/F	14QC17/D	4.92	V 14 H11	0.71	-	-	1.34	1.34	0.55	1.02	2.99	2.83	0.87
17QC17/F	17QC17/D	4.92	V 17 H11	-	0.87	-	1.34	1.34	0.55	1.02	2.99	2.83	0.87
14MC18/F	14MC18/D	6.30	-	-	-	B 14 H7	1.50	1.50	0.55	1.14	3.27	3.15	0.98
17QC18/F	17QC18/D	6.30	V 17 H11	0.87	-	-	1.50	1.50	0.55	1.14	3.27	3.15	0.98
19QC18/F	19QC18/D	6.30	V 19 H11	-	0.99	-	1.50	1.50	0.55	1.14	3.27	3.15	0.98
17MC19/F	17MC19/D	7.87	-	-	-	B 17 H7	1.73	1.73	0.83	1.34	3.80	3.54	1.10
19QC19/F	19QC19/D	7.87	V 19 H11	0.99	-	-	1.73	1.73	0.83	1.34	3.80	3.54	1.10
22QC19/F	22QC19/D	7.87	V 22 H11	-	1.11	-	1.73	1.73	0.83	1.34	3.80	3.54	1.10
17MC20/F	17MC20/D	9.84	-	-	-	B 17 H7	1.89	1.89	0.83	1.42	4.15	3.94	1.26
22QC20/F	22QC20/D	9.84	V 22 H11	1.11	-	-	1.89	1.89	0.83	1.42	4.15	3.94	1.26
24QC20/F	24QC20/D	9.84	V 24 H11	-	1.27	-	1.89	1.89	0.83	1.42	4.15	3.94	1.26

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

Length l	s H11 Square		e min. (Column 1)	(Column 2)	d₁ H7 Bore	d₂	h₁	h₂	h₃ ≈	h₄ ≈ Type D	Type F	Ø Handle

2.48	V 10	-	0.52	-	-	0.79	0.79	0.43	0.59	2.15	1.97	0.63
3.15	V 10	V 12	0.52	0.63	B 8	0.94	0.94	0.51	0.71	2.40	2.20	0.71
3.94	V 12	V 14	0.63	0.71	B 10	1.10	1.10	0.51	0.83	2.64	2.52	0.79
4.92	V 14	V 17	0.71	0.87	B 10	1.34	1.34	0.55	1.02	2.99	2.83	0.87
6.30	V 17	V 19	0.87	0.99	B 14	1.50	1.50	0.55	1.14	3.27	3.15	0.98
7.87	V 19	V 22	0.99	1.11	B 17	1.73	1.73	0.83	1.34	3.80	3.54	1.10
9.84	V 22	V 24	1.11	1.27	B 17	1.89	1.89	0.83	1.42	4.15	3.94	1.26

Build & Price

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ H11	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total (net)

US$33.31

In Stock: 2

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	US$33.31
50	99	US$30.53
100	249	US$27.76
≥ 250		US$24.98

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.264 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.