The cart is empty.

GN 750 Control Levers Steel, with Round or Square Through Bore, or Keyway

Type: N - Plain cover

Standard Sheet GN 750 Print This Page Assembly Examples Keyways WN 6885 / DIN 6885-1 Cross Holes GN 110 Square Bores WN 79 ISO Fundamental Tolerances Plastic Characteristics

Product description

The cylindrical shape of the hub together with the light gray cover give these control levers GN 750 a pleasent appearance.

The cover hides fasteners and provides a printing area for any symbols or logos. On assembly, the cover is pushed in by hand and can be removed with a screwdriver via a slot in the cover.

Specification

Hub / arm
Steel, blackened finish

Cover
Plastic, light gray

Cylindrical handle EN 519
Plastic
Duroplast (Phenolic PF)
Black, shiny finish

RoHS

On request

Control lever versions of the
assembly examples
Special inch and metric bores, threads or keyways

GN 750 Steel Control Levers, with Round or Square Through Bore, or Keyway sketch

Hide technical drawing

Part Options / Table

Bore code

B	Without keyway
K	With keyway
V	With square

Type

M	Cover with indicator point
N	Plain cover

Part Number M - Cover with indicator point	Part Number N - Plain cover	d₁	d₂ Bore H7 Square H11	d₃	d₄	d₅	d₆	h₁	h₂	h₃	h₄ ≈	Length l


10MA89/M	10MA89/N	1.26	0.394 H7 / H11	0.98	0.91	0.71	0.31	0.83	0.59	0.17	1.69	3.31
750-32-K10-M	750-32-K10-N	1.26	0.394 H7 / H11	0.98	0.91	0.71	0.31	0.83	0.59	0.17	1.69	3.31
750-32-V10-M	750-32-V10-N	1.26	0.394 H7 / H11	0.98	0.91	0.71	0.31	0.83	0.59	0.17	1.69	3.31
10MA90/M	10MA90/N	1.57	0.394 H7 / H11	1.26	1.18	0.83	0.35	0.98	0.75	0.16	2.13	4.17
750-40-K10-M	750-40-K10-N	1.57	0.394 H7 / H11	1.26	1.18	0.83	0.35	0.98	0.75	0.16	2.13	4.17
750-40-V10-M	750-40-V10-N	1.57	0.394 H7 / H11	1.26	1.18	0.83	0.35	0.98	0.75	0.16	2.13	4.17
12MA90/M	12MA90/N	1.57	0.472 H7 / H11	1.26	1.18	0.83	0.35	0.98	0.75	0.16	2.13	4.17
750-40-K12-M	750-40-K12-N	1.57	0.472 H7 / H11	1.26	1.18	0.83	0.35	0.98	0.75	0.16	2.13	4.17
750-40-V12-M	750-40-V12-N	1.57	0.472 H7 / H11	1.26	1.18	0.83	0.35	0.98	0.75	0.16	2.13	4.17
14MA91/M	14MA91/N	1.97	0.551 H7 / H11	1.57	1.48	0.91	0.43	1.10	0.87	0.15	2.48	5.12
750-50-K14-M	750-50-K14-N	1.97	0.551 H7 / H11	1.57	1.48	0.91	0.43	1.10	0.87	0.15	2.48	5.12
750-50-V14-M	750-50-V14-N	1.97	0.551 H7 / H11	1.57	1.48	0.91	0.43	1.10	0.87	0.15	2.48	5.12
16MA91/M	16MA91/N	1.97	0.630 H7 / H11	1.57	1.48	0.91	0.43	1.10	0.87	0.15	2.48	5.12
750-50-K16-M	750-50-K16-N	1.97	0.630 H7 / H11	1.57	1.48	0.91	0.43	1.10	0.87	0.15	2.48	5.12
750-50-V16-M	750-50-V16-N	1.97	0.630 H7 / H11	1.57	1.48	0.91	0.43	1.10	0.87	0.15	2.48	5.12

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ Bore H7 Square H11		d₃	d₄	d₅	d₆	h₁	h₂	h₃	h₄ ≈	Length l

1.26	0.394	-	0.98	0.91	0.71	0.31	0.83	0.59	0.17	1.69	3.31
1.57	0.394	0.472	1.26	1.18	0.83	0.35	0.98	0.75	0.16	2.13	4.17
1.97	0.551	0.630	1.57	1.48	0.91	0.43	1.10	0.87	0.15	2.48	5.12

Build & Price

Assembly Examples

GN 750 control levers with Short Press-Fit Ball Plungers GN 614 mounted with a cross pin. The arrangement of the spring plunger facilitates simple installation; if desired the detent cone can be drilled out from the shifting hub in situ before the plunger is fitted. The recessed shaft and the bore for the spring plunger are hidden by the cover.

GN 750 control lever with hub keyway / parallel key, mounted axially by Countersunk Washers GN 184, with an annular groove for attaching pins to limit the angle of rotation.

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ H11	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total (net)

US$23.92

In Stock: 10

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	US$23.92
100	249	US$21.93
250	499	US$19.94
≥ 500		US$17.94

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.271 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.