T-angle linear actuator connectors GN 191.1 are based on T-angle connector clamps. The additionally provided mounting holes are used to connect to the drive key of a linear actuator. Bores with the designation “G” are equipped with sleeve bearings.
With the screw location z2, the play of the guide bore d1 can be adjusted or the linear actuator connectors can be clamped after adjustment.
For quick clamping without tools, the socket cap screw can be replaced by the adjustable lever GN 911.3 listed in the table as accessory.
Body
Stainless steelNI AISI CF-8
Sleeve bearing
Plastic (PTFE)
Socket cap screws DIN 912
Stainless steel AISI 304
Hex nuts DIN 985
Stainless steel AISI 304
Self-locking via polyamide ring
RoHS
Inch size bores
| 2 | With 2 stainless steel socket cap screws DIN 912 |
| d1 Bore with sleeve bearing | d2 Bore | d3 Mounting screws on the drive key | k Clamping length | l1 | l2 | m | z1 Screw location for screw size | z2 Screw location for screw size | Accessory Recommended lever GN 911.3 for z1 l3 | for z2 l3 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G 18 | B 18 | M 3 | 0.98 | 2.40 | 1.36 | 1.54 | M6-20 | M6-20 | 1.77 | 2.48 | 1.77 | 2.48 |
| Min | Max | Price |
|---|---|---|
| 1 | 9 | $142.91 |
| 10 | 24 | $131.00 |
| 25 | 49 | $119.10 |
| ≥ 50 | $107.19 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
