T-Angle Linear Actuator Connectors GN 192.1

Product description

Information

T-angle linear actuator connectors GN 192.1 are based on T-angle connector clamps. The additionally provided mounting holes are used to connect to the drive key of a linear actuator. Bores with the designation “G” are equipped with sleeve bearings.

With the screw location z₂, the play of the guide bore d₁ can be adjusted or the linear actuator connectors can be clamped after adjustment.

For quick clamping without tools, the socket cap screws can be replaced by the adjustable levers GN 911 listed in the table as accessories.

Specification

Body
Aluminum
Powder coated
Black, RAL 9005, textured finishS

Sleeve bearing
Plastic (PTFE)

Socket cap screws DIN 912
Stainless steel AISI 304

Hex nuts DIN 985
Stainless steel AISI 304
Self-locking via polyamide ring

RoHS

Accessory

Adjustable Levers GN 911

On request

Inch size bores

Build & Price

Part Number	d₁ Bore Without sleeve bearing	'With sleeve bearing	d₂ Bore	k₁ Clamping length	d₃ Mounting screws on the drive key	k₂ Clamping length	l₁	l₂	m	z₁ Screw location for screw size	z₂ Screw location for screw size	Accessory Recom. lever GN 911 for z₁ l₃		for z₂ l₃

192.1-G30-B30-40-2-S	-	G 30	B 30	1.57	M 4	1.67	3.62	2.05	2.36	M8-25	M8-25	2.48	3.07	2.48	3.07
192.1-B30-B30-40-2-S	B 30	-	B 30	1.57	M 4	1.67	3.62	2.05	2.36	M8-25	M8-25	2.48	3.07	2.48	3.07
192.1-G30-B30-56-2-S	-	G 30	B 30	2.20	M 4	2.44	5.12	2.68	3.54	M10-35	M10-35	-	-	-	-
192.1-B30-B30-56-2-S	B 30	-	B 30	2.20	M 4	2.44	5.12	2.68	3.54	M10-35	M10-35	-	-	-	-
192.1-G40-B40-56-2-S	-	G 40	B 40	2.20	M 5	2.44	5.12	2.68	3.54	M10-35	M10-35	3.07	3.62	-	3.62
192.1-B40-B40-56-2-S	B 40	-	B 40	2.20	M 5	2.44	5.12	2.68	3.54	M10-35	M10-35	3.07	3.62	-	3.62
192.1-G40-B40-65-2-S	-	G 40	B 40	2.56	M 5	2.95	5.83	3.05	4.06	M10-50	M10-50	-	3.62	-	-
192.1-B40-B40-65-2-S	B 40	-	B 40	2.56	M 5	2.95	5.83	3.05	4.06	M10-50	M10-50	-	3.62	-	-
192.1-G50-B50-65-2-S	-	G 50	B 50	2.56	M 6	2.95	5.83	3.05	4.06	M10-50	M10-50	3.07	3.62	3.07	3.62
192.1-B50-B50-65-2-S	B 50	-	B 50	2.56	M 6	2.95	5.83	3.05	4.06	M10-50	M10-50	3.07	3.62	3.07	3.62
192.1-G60-B60-80-2-S	-	G 60	B 60	3.15	M 8	3.15	6.97	3.62	4.92	M10-50	M10-50	3.07	3.62	-	-
192.1-B60-B60-80-2-S	B 60	-	B 60	3.15	M 8	3.15	6.97	3.62	4.92	M10-50	M10-50	3.07	3.62	-	-

d₁ Bore Without sleeve bearing	'With sleeve bearing	d₂ Bore	k₁ Clamping length	d₃ Mounting screws on the drive key	k₂ Clamping length	l₁	l₂	m	z₁ Screw location for screw size	z₂ Screw location for screw size	Accessory Recom. lever GN 911 for z₁ l₃		for z₂ l₃

B 30	G 30	B 30	1.57	M 4	1.67	3.62	2.05	2.36	M8-25	M8-25	2.48	3.07	2.48	3.07
B 30	G 30	B 30	2.20	M 4	2.44	5.12	2.68	3.54	M10-35	M10-35	-	-	-	-
B 40	G 40	B 40	2.20	M 5	2.44	5.12	2.68	3.54	M10-35	M10-35	3.07	3.62	-	3.62
B 40	G 40	B 40	2.56	M 5	2.95	5.83	3.05	4.06	M10-50	M10-50	-	3.62	-	-
B 50	G 50	B 50	2.56	M 6	2.95	5.83	3.05	4.06	M10-50	M10-50	3.07	3.62	3.07	3.62
B 60	G 60	B 60	3.15	M 8	3.15	6.97	3.62	4.92	M10-50	M10-50	3.07	3.62	-	-

3D Product Configurator

Selected Part

Part Number

Total US Dollars (net)

$57.92

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	9	$57.92
10	24	$53.09
25	49	$48.27
≥ 50		$43.44

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.407 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.