Spoked Handwheels GN 228

GN 228 Stainless Steel AISI 316L Sheet Metal Spoked Handwheels, with or without Revolving Handle Material: A4 - Stainless steel
Bore code: B - Without keyway
Type: D - With revolving handle

Material: A4 - Stainless steel
Bore code: B - Without keyway
Type: D - With revolving handle

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 228 Print This Page Keyways WN 6885 / DIN 6885-1 Square Bores WN 79 Cross Holes GN 110 ISO Fundamental Tolerances Plastic Characteristics Stainless Steel Characteristics

Product description

Spoked handwheels GN 228 made from stainless steel sheet metal are renowned for their high mechanical strength and unaffected by shocks and knocks. The hub lengths l₁ and the diameter d₃ conform to DIN 950.

The stainless steel version is suitable for applications in highly corrosive environments due to the AISI 316L materials used.

On the revolving handles of type D, the O-rings minimize the radial play, protect the handle bearing from penetrating dirt and prevent noises resulting from vibration.

Specification

Body
Stainless steelA4 AISI 316L

Matte shot-blasted finishGS
Stainless steel sheet metal wheel body
Hub welded to body

Revolving handle, similar to GN 598.2
Plastic, phenolic resin (PF)

Black, shiny finish
Threaded spindle
Stainless steel AISI 316L
O-ring
Acrylonitrile butadiene rubber (NBR)

RoHS

Accessory

Countersunk Washers GN 184 (for Axial Fixing)

On request

Other modifications such as special through holes, square broached holes larger than listed, special keyways, set screw holes, and cross holes

Hide technical drawing

GN 228 Stainless Steel AISI 316L Sheet Metal Spoked Handwheels, with or without Revolving Handle sketch

Part Options / Table

Bore code

B	Without keyway
K	With keyway
V	With square

Type

A	Without handle
D	With revolving handle

Part Number A - Without handle	Part Number D - With revolving handle	d₁	d₂ H9 Bore	s H11 Square	b	d₃	l₁	l₂ ≈	l₃	r	Ø Handle	No. of spokes	Sheet metal thickness

228-A4-125-B1/2-A-GS		4.92*	1/2 H9	V 1/2 H11	0.71	1.18	0.71	1.14	-	-	-	3	0.06
228-A4-160-B1/2-A-GS		6.30	1/2 H9	V 1/2 H11	0.87	1.18	0.79	1.46	-	2.68	1.02	4	0.06
	228-A4-160-B1/2-D-GS	6.30	1/2 H9	V 1/2 H11	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
228-A4-200-B5/8-A-GS		7.87	5/8 H9	V 5/8 H11	0.87	1.57	0.94	1.81	-	3.46	1.02	4	0.10
	228-A4-200-B5/8-D-GS	7.87	5/8 H9	V 5/8 H11	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.10
228-A4-250-B3/4-A-GS		9.84	3/4 H9	V 3/4 H11	1.18	1.77	1.10	2.05	-	4.25	1.10	5	0.10
	228-A4-250-B3/4-D-GS	9.84	3/4 H9	V 3/4 H11	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
228-A4-315-B3/4-A-GS		12.40	3/4 H9	V 3/4 H11	1.38	2.17	1.30	2.52	-	5.43	1.10	5	0.10
	228-A4-315-B3/4-D-GS	12.40	3/4 H9	V 3/4 H11	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
228-A4-400-B1.00-A-GS		15.75	1.00 H9	V 1.00 H11	1.57	2.56	1.50	3.23	-	7.05	1.10	5	0.12
	228-A4-400-B1.00-D-GS	15.75	1.00 H9	V 1.00 H11	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12
228-A4-125-B11-A-GS		4.92*	11 H9	V 11 H11	0.71	1.18	0.71	1.14	-	-	-	3	0.06
228-A4-160-B12-A-GS		6.30	12 H9	V 12 H11	0.87	1.18	0.79	1.46	-	2.68	1.02	4	0.06
	228-A4-160-B12-D-GS	6.30	12 H9	V 12 H11	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
228-A4-200-B14-A-GS		7.87	14 H9	V 14 H11	0.87	1.57	0.94	1.81	-	3.46	1.02	4	0.08
	228-A4-200-B14-D-GS	7.87	14 H9	V 14 H11	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.08
228-A4-250-B17-A-GS		9.84	17 H9	V 17 H11	1.18	1.77	1.10	2.05	-	4.25	1.10	5	0.10
	228-A4-250-B17-D-GS	9.84	17 H9	V 17 H11	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
228-A4-315-B19-A-GS		12.40	19 H9	V 19 H11	1.38	2.17	1.30	2.52	-	5.43	1.10	5	0.10
	228-A4-315-B19-D-GS	12.40	19 H9	V 19 H11	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
228-A4-400-B24-A-GS		15.75	24 H9	V 24 H11	1.57	2.56	1.50	3.23	-	7.05	1.10	5	0.12
	228-A4-400-B24-D-GS	15.75	24 H9	V 24 H11	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12

Part Number A - Without handle	Part Number D - With revolving handle	d₁	d₂ H9 Bore	s H11 Square	b	d₃	l₁	l₂ ≈	l₃	r	Ø Handle	No. of spokes	Sheet metal thickness

228-A4-125-K1/2-A-GS		4.92*	1/2 H9	V 1/2 H11	0.71	1.18	0.71	1.14	-	-	-	3	0.06
228-A4-160-K1/2-A-GS		6.30	1/2 H9	V 1/2 H11	0.87	1.18	0.79	1.46	-	2.68	1.02	4	0.06
	228-A4-160-K1/2-D-GS	6.30	1/2 H9	V 1/2 H11	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
228-A4-200-K5/8-A-GS		7.87	5/8 H9	V 5/8 H11	0.87	1.57	0.94	1.81	-	3.46	1.02	4	0.10
	228-A4-200-K5/8-D-GS	7.87	5/8 H9	V 5/8 H11	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.10
228-A4-250-K3/4-A-GS		9.84	3/4 H9	V 3/4 H11	1.18	1.77	1.10	2.05	-	4.25	1.10	5	0.10
	228-A4-250-K3/4-D-GS	9.84	3/4 H9	V 3/4 H11	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
228-A4-315-K3/4-A-GS		12.40	3/4 H9	V 3/4 H11	1.38	2.17	1.30	2.52	-	5.43	1.10	5	0.10
	228-A4-315-K3/4-D-GS	12.40	3/4 H9	V 3/4 H11	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
228-A4-400-K1.00-A-GS		15.75	1.00 H9	V 1.00 H11	1.57	2.56	1.50	3.23	-	7.05	1.10	5	0.12
	228-A4-400-K1.00-D-GS	15.75	1.00 H9	V 1.00 H11	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12
228-A4-125-K11-A-GS		4.92*	11 H9	V 11 H11	0.71	1.18	0.71	1.14	-	-	-	3	0.06
228-A4-160-K12-A-GS		6.30	12 H9	V 12 H11	0.87	1.18	0.79	1.46	-	2.68	1.02	4	0.06
	228-A4-160-K12-D-GS	6.30	12 H9	V 12 H11	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
228-A4-200-K14-A-GS		7.87	14 H9	V 14 H11	0.87	1.57	0.94	1.81	-	3.46	1.02	4	0.08
	228-A4-200-K14-D-GS	7.87	14 H9	V 14 H11	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.08
228-A4-250-K17-A-GS		9.84	17 H9	V 17 H11	1.18	1.77	1.10	2.05	-	4.25	1.10	5	0.10
	228-A4-250-K17-D-GS	9.84	17 H9	V 17 H11	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
228-A4-315-K19-A-GS		12.40	19 H9	V 19 H11	1.38	2.17	1.30	2.52	-	5.43	1.10	5	0.10
	228-A4-315-K19-D-GS	12.40	19 H9	V 19 H11	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
228-A4-400-K24-A-GS		15.75	24 H9	V 24 H11	1.57	2.56	1.50	3.23	-	7.05	1.10	5	0.12
	228-A4-400-K24-D-GS	15.75	24 H9	V 24 H11	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12

Part Number A - Without handle	Part Number D - With revolving handle	d₁	d₂ H9 Bore	s H11 Square	b	d₃	l₁	l₂ ≈	l₃	r	Ø Handle	No. of spokes	Sheet metal thickness

228-A4-125-V1/2-A-GS		4.92*	1/2 H9	V 1/2 H11	0.71	1.18	0.71	1.14	-	-	-	3	0.06
228-A4-160-V1/2-A-GS		6.30	1/2 H9	V 1/2 H11	0.87	1.18	0.79	1.46	-	2.68	1.02	4	0.06
	228-A4-160-V1/2-D-GS	6.30	1/2 H9	V 1/2 H11	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
228-A4-200-V5/8-A-GS		7.87	5/8 H9	V 5/8 H11	0.87	1.57	0.94	1.81	-	3.46	1.02	4	0.10
	228-A4-200-V5/8-D-GS	7.87	5/8 H9	V 5/8 H11	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.10
228-A4-250-V3/4-A-GS		9.84	3/4 H9	V 3/4 H11	1.18	1.77	1.10	2.05	-	4.25	1.10	5	0.10
	228-A4-250-V3/4-D-GS	9.84	3/4 H9	V 3/4 H11	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
228-A4-315-V3/4-A-GS		12.40	3/4 H9	V 3/4 H11	1.38	2.17	1.30	2.52	-	5.43	1.10	5	0.10
	228-A4-315-V3/4-D-GS	12.40	3/4 H9	V 3/4 H11	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
228-A4-400-V1.00-A-GS		15.75	1.00 H9	V 1.00 H11	1.57	2.56	1.50	3.23	-	7.05	1.10	5	0.12
	228-A4-400-V1.00-D-GS	15.75	1.00 H9	V 1.00 H11	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12
228-A4-125-V11-A-GS		4.92*	11 H9	V 11 H11	0.71	1.18	0.71	1.14	-	-	-	3	0.06
228-A4-160-V12-A-GS		6.30	12 H9	V 12 H11	0.87	1.18	0.79	1.46	-	2.68	1.02	4	0.06
	228-A4-160-V12-D-GS	6.30	12 H9	V 12 H11	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
228-A4-200-V14-A-GS		7.87	14 H9	V 14 H11	0.87	1.57	0.94	1.81	-	3.46	1.02	4	0.08
	228-A4-200-V14-D-GS	7.87	14 H9	V 14 H11	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.08
228-A4-250-V17-A-GS		9.84	17 H9	V 17 H11	1.18	1.77	1.10	2.05	-	4.25	1.10	5	0.10
	228-A4-250-V17-D-GS	9.84	17 H9	V 17 H11	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
228-A4-315-V19-A-GS		12.40	19 H9	V 19 H11	1.38	2.17	1.30	2.52	-	5.43	1.10	5	0.10
	228-A4-315-V19-D-GS	12.40	19 H9	V 19 H11	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
228-A4-400-V24-A-GS		15.75	24 H9	V 24 H11	1.57	2.56	1.50	3.23	-	7.05	1.10	5	0.12
	228-A4-400-V24-D-GS	15.75	24 H9	V 24 H11	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁	d₂ H9 Bore	s H11 Square	b	d₃	l₁	l₂ ≈	l₃	r	Ø Handle	No. of spokes	Sheet metal thickness

4.92*	1/2	V 1/2	0.71	1.18	0.71	1.14	-	-	-	3	0.06
6.30	1/2	V 1/2	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
7.87	5/8	V 5/8	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.10
9.84	3/4	V 3/4	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
12.40	3/4	V 3/4	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
15.75	1.00	V 1.00	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12

*Only available in type A

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ H9 Bore	s H11 Square	b	d₃	l₁	l₂ ≈	l₃	r	Ø Handle	No. of spokes	Sheet metal thickness

4.92*	11	V 11	0.71	1.18	0.71	1.14	-	-	-	3	0.06
6.30	12	V 12	0.87	1.18	0.79	1.46	3.15	2.68	1.02	4	0.06
7.87	14	V 14	0.87	1.57	0.94	1.81	3.15	3.46	1.02	4	0.08
9.84	17	V 17	1.18	1.77	1.10	2.05	3.54	4.25	1.10	5	0.10
12.40	19	V 19	1.38	2.17	1.30	2.52	3.54	5.43	1.10	5	0.10
15.75	24	V 24	1.57	2.56	1.50	3.23	3.54	7.05	1.10	5	0.12

*Only available in type A

Build & Price

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ H11	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total (net)

US$135.42

In Stock: 48

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	US$135.42
50	99	US$124.14
100	249	US$112.85
≥ 250		US$101.57

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 1.230 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.