The cart is empty.
Product Photo | Part Number | Description | Quantity | Unit Price(USD) | Total Price(USD) |
---|
plus shipping and tax
Digital position indicators EN 953 have a direct coupled drive with digital indications.
The two housing component parts are ultrasonically welded, thus making the housing especially sturdy and compact.
The foam rubber seal at the back of the indicator housing prevents the transmission of vibration between the machine and the counter mechanism and also acts as a seal.
Special attention was paid to the positioning of the readout window. The numbers are easily legible and are even enlarged by the magnifying effect of the sight glass.
Housing
Plastic
Technopolymer (Polyamide PA)
Counter
Shaft receptacle
Steel, blackened finish
Set screw DIN 916
With internal hex and serrated point
RoHS
Other counter indication
AN | On the chamfer, above |
AR | On the chamfer, below |
FN | In the front, above |
FR | In the front, below |
R | Numbers increasing clockwise |
L | Numbers increasing counter-clockwise |
Filter combination produces no result.
Filter combination produces no result.
Bore d H7 | Counter | Indication after 1 spindle revolution | Corresponds to thread pitch in millimeters | Max. revolutions per minute |
---|---|---|---|---|
B 3/4 | 00.050 | 00.050 | 0.05 | 500 |
B 3/4 | 00.100 | 00.100 | 0.10 | 250 |
B 3/4 | 000.10 | 000.10 | 0.10 | 1500 |
B 3/4 | 000.20 | 000.20 | 0.20 | 1250 |
B 3/4 | 000.40 | 000.40 | 0.40 | 625 |
B 3/4 | 000.50 | 000.50 | 0.50 | 500 |
B 3/4 | 001.00 | 001.00 | 1.00 | 250 |
B 3/4 | 0001.0 | 0001.0 | 1.00 | 1500 |
B 3/4 | 0002.0 | 0002.0 | 2.00 | 1250 |
B 3/4 | 0002.5 | 0002.5 | 2.50 | 1000 |
B 3/4 | 0003.0 | 0003.0 | 3.00 | 830 |
B 3/4 | 0004.0 | 0004.0 | 4.00 | 625 |
B 3/4 | 0005.0 | 0005.0 | 5.00 | 500 |
B 3/4 | 0006.0 | 0006.0 | 6.00 | 415 |
B 3/4 | 0010.0 | 0010.0 | 10.00 | 250 |
Filter combination produces no result.
Bore d H7 | Counter | Indication after 1 spindle revolution | Corresponds to thread pitch in millimeters | Max. revolutions per minute |
---|---|---|---|---|
B 20 | 00.050 | 00.050 | 0.05 | 500 |
B 20 | 00.100 | 00.100 | 0.10 | 250 |
B 20 | 000.10 | 000.10 | 0.10 | 1500 |
B 20 | 000.20 | 000.20 | 0.20 | 1250 |
B 20 | 000.40 | 000.40 | 0.40 | 625 |
B 20 | 000.50 | 000.50 | 0.50 | 500 |
B 20 | 001.00 | 001.00 | 1.00 | 250 |
B 20 | 0001.0 | 0001.0 | 1.00 | 1500 |
B 20 | 0002.0 | 0002.0 | 2.00 | 1250 |
B 20 | 0002.5 | 0002.5 | 2.50 | 1000 |
B 20 | 0003.0 | 0003.0 | 3.00 | 830 |
B 20 | 0004.0* | 0004.0 | 4.00 | 625 |
B 20 | 0005.0 | 0005.0 | 5.00 | 500 |
B 20 | 0006.0 | 0006.0 | 6.00 | 415 |
B 20 | 0010.0 | 0010.0 | 10.00 | 250 |
Filter combination produces no result.
Before installing the position indicator, a locating bore for the torque limiting contact point is to be drilled on the machine side according to the sketch. With the Mounting Adaptors EN 952.1 the hollow shaft (with bore 20 H7) of the position indicator can be adapted to fit the spindle. The mounting of the position indicator is via the torque limiting contact point which is connected to the hollow spindle and secured with a set screw. Before completing the installation, turn the spindle to the starting point (0 position) and zero the position indicator. With Clamping Plates GN 953.7 spindles can be clamped and secured after adjusting. |
The digital position indicator is equipped with a hollow shaft that is slid directly onto the spindle and is connected to the spindle by a set screw. The spindle rotations are transmitted to a counter directly by a gearbox. For torque support, a pin of the housing projects into a hole made on the machine side, establishing the position relative to the mounting site. |
|||||||||||
The transmission ratio and counting direction of the counter are determined by the pitch of the adjusting spindle. The indicated value after one turn starting from the 0 position serves as a characteristic value. Decimal places are indicated in red. |
Min | Max | Price |
---|---|---|
1 | 6 | $76.01 |
7 | 99 | $73.25 |
100 | 249 | $69.10 |
≥ 250 | $62.19 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
You are looking for a Winco partner near you? Please select the country.
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time