Rotary Toggle Latches EN 5630

Photo

EN 5630 Technopolymer Plastic Rotary Toggle Latches, with Lockable T-Handle Color T-handle: SW - Black, RAL 9005, matte finish

Original design
code: CSMH.

Color T-handle: SW - Black, RAL 9005, matte finish

EN 5630 Technopolymer Plastic Rotary Toggle Latches, with Lockable T-Handle Color T-handle: GR - Gray, RAL 7035, matte finish

Standard Sheet EN 5630 Print This Page IP Protection Classes Plastic Characteristics Description of Function, Operation, Installation Opening

Product description

Information

Rotary toggle latches EN 5630 allow doors, covers and hatches to be closed and locked.

The pull-out T-handle rotates the latch arm 90° into the closed position behind the frame. By folding the T-handle into the housing, the latch arm executes a 5 mm (0.20”) linear stroke which presses the latch arm against the frame. For example, this provides an edge protection seal profile with the necessary pressure in the end position. The two-stage movement secures the closure against vibration.

The position of the latch arm can be adjusted along the adjustable range l₂ and is fixed with a threaded pin. In the folded-down position, the T-handle can be locked with the key. The T-handle and the latch housing are provided with a hole d₃ which can be used for a padlock.

For the type with the same lock, every lock can be opened with the same key. For the type with different locks, there are over 400 different lock variants with correspondingly numbered keys.

The 4 mounting screws are injection-molded in the housing. The delivery includes 4 corresponding nuts and 2 removable keys.

Specification

Latch housing
Plastic, polyamide
Technopolymer (Polyamide PA)
- Glass fiber reinforced
- Temperature resistant up to 176 °F (80 °C)
- Black, RAL 9005, matte finish

T-handle
Zinc die-cast
Powder coated
Black, RAL 9005, matte finishSW
Gray, RAL 7035, matte finishGR

Lock mechanism / latch arm
Zinc die-cast

Key
Brass, nickel plated

Screws / nuts
Steel, zinc plated, blue passivated finish

Housing seal
Silicone, transparent

Protection class IP 65

RoHS

Build & Price

l₁	b	d₁	d₂	d₃	h	l₂ Adjustable range min.	max.	l₃	l₄ Stroke	l₅

3.03	5.04	0.71	M 5	0.35	4.57	0.51	2.95	0.51	0.20	2.48

3D Product Configurator

Type

SCT - Lockable (Keyed alike)

SUT - Lockable (Keyed differently)

Length l₁

3.03

Color T-handle

GR - Gray, RAL 7035, matte finish

SW - Black, RAL 9005, matte finish

Description of Function, Operation


$GN 5630{St:_}Sketch 1$				The lift and turn compression latch is first unlocked with the key. When the T-handle is then folded out, the latch arm executes a 5 mm (0.20“) linear stroke and lifts off of the frame.
$GN 5630{St:_}Sketch 2$				By rotating the T-handle by 90°, the latch arm moves into the open position.
$GN 5630{St:_}Sketch 3$				In this position, doors and covers can be opened and closed.
$GN 5630{St:_}Sketch 4$				Rotating the T-handle another 90° moves the latch arm back into the lock position. Folding down the T-handle causes the lift and turn compression latch to execute a linear stroke that draws the latch arm against the frame. In this position, the lift and turn compression cam lock can be locked with the key or an additional padlock as needed.