Hex Head Screws GN 1582

Photo

Finish: PL - Polished finish (Ra < 0.8 µm)
Sealing ring material: H - H-NBR

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product Family Hygienic Design

Standard Parts of the “Hygienic Design” product family are labeled with the HD icon. They combine high surface quality, freedom from dead spaces, non-scooped outer surfaces, and sealed bolting areas. A sealing concept based on FEM calculations ensures reliable contact pressure after installation.

suitable for use in hygienically sensitive areas
quick and easy cleaning
no dead spaces due to functional seals
certified according to EHEDG guidelines

Show all Hygienic Design products

FDA compliant

Standard Sheet GN 1582 Print This Page Hygienic Design Information Hygienic Design - Leaflet EHEDG Certification Plastic Characteristics Stainless Steel Characteristics

Product description

Information

Hex head screws GN 1582 with the low-profile head are certified according to EHEDG guidelines and are ideal for use in hygienic areas. The d₄ dimension has been created to allow the screw to be used as a captive screw with or without a lock washer to secure it against loss.

It is necessary to provide tapped bores with the thread d₁ on each of the two components to be assembled. Additionally, a clearance bore of d₅ on one or both sides must be drilled. Depending on the design and required clamping length a₁ ... a₃ of the component being attached, there are a number of assembly options as shown above. Alternatively, securing can also be achieved by an additional lock washer mounted on the thin shank d₄.

Specification

Body
Stainless steel AISI 316L

Matte finish (Ra < 0.8 µm)MT
Polished finish (Ra < 0.8 µm)PL

Sealing ring

H-NBRH
Temperature resistant -13 °F
to +302 °F (-25 °C to +150 °C)
EPDME
Temperature resistant -40 °F
to +248 °F (-40 °C to +120 °C)
Blue
Hardness 85 ±5 Shore A
FDA compliant

RoHS

Accessory

Sealing Rings GN 7600

On request

with FKM sealing ring (Fluorine rubber) F

Build & Price

Part Number H - H-NBR	Part Number E - EPDM	d₁	l₁	a₁ in millimeters	a₂ in millimeters	a₃ in millimeters	d₂	d₃	d₄	d₅	k	l₂	l₃	A/F

1582-M5-20-MT-H-1	1582-M5-20-MT-E-1	M 5	0.79	2.5-6	6-10.5	10.5-14	0.43	0.46	0.16	0.22	0.28	0.24	0.10	0.31
1582-M5-25-MT-H-1	1582-M5-25-MT-E-1	M 5	0.98	6-11	11-14	14-19	0.43	0.46	0.16	0.22	0.28	0.24	0.10	0.31
1582-M6-25-MT-H-1	1582-M6-25-MT-E-1	M 6	0.98	3-7	7-13	13-17	0.51	0.54	0.19	0.26	0.30	0.31	0.12	0.39
1582-M6-30-MT-H-1	1582-M6-30-MT-E-1	M 6	1.18	7-12	12-17	17-22	0.51	0.54	0.19	0.26	0.30	0.31	0.12	0.39
1582-M8-30-MT-H-1	1582-M8-30-MT-E-1	M 8	1.18	4-8	8-16	16-20	0.63	0.66	0.26	0.33	0.33	0.39	0.16	0.51
1582-M8-40-MT-H-1	1582-M8-40-MT-E-1	M 8	1.57	8-18	18-25	25-30	0.63	0.66	0.26	0.33	0.33	0.39	0.16	0.51
1582-M10-40-MT-H-1	1582-M10-40-MT-E-1	M 10	1.57	5-14	14-19	19-28	0.75	0.78	0.32	0.41	0.37	0.47	0.20	0.63
1582-M10-50-MT-H-1	1582-M10-50-MT-E-1	M 10	1.97	14-24	24-28	28-38	0.75	0.78	0.32	0.41	0.37	0.47	0.20	0.63

Part Number H - H-NBR	Part Number E - EPDM	d₁	l₁	a₁ in millimeters	a₂ in millimeters	a₃ in millimeters	d₂	d₃	d₄	d₅	k	l₂	l₃	A/F

1582-M5-20-PL-H-1	1582-M5-20-PL-E-1	M 5	0.79	2.5-6	6-10.5	10.5-14	0.43	0.46	0.16	0.22	0.28	0.24	0.10	0.31
1582-M5-25-PL-H-1	1582-M5-25-PL-E-1	M 5	0.98	6-11	11-14	14-19	0.43	0.46	0.16	0.22	0.28	0.24	0.10	0.31
1582-M6-25-PL-H-1	1582-M6-25-PL-E-1	M 6	0.98	3-7	7-13	13-17	0.51	0.54	0.19	0.26	0.30	0.31	0.12	0.39
1582-M6-30-PL-H-1	1582-M6-30-PL-E-1	M 6	1.18	7-12	12-17	17-22	0.51	0.54	0.19	0.26	0.30	0.31	0.12	0.39
1582-M8-30-PL-H-1	1582-M8-30-PL-E-1	M 8	1.18	4-8	8-16	16-20	0.63	0.66	0.26	0.33	0.33	0.39	0.16	0.51
1582-M8-40-PL-H-1	1582-M8-40-PL-E-1	M 8	1.57	8-18	18-25	25-30	0.63	0.66	0.26	0.33	0.33	0.39	0.16	0.51
1582-M10-40-PL-H-1	1582-M10-40-PL-E-1	M 10	1.57	5-14	14-19	19-28	0.75	0.78	0.32	0.41	0.37	0.47	0.20	0.63
1582-M10-50-PL-H-1	1582-M10-50-PL-E-1	M 10	1.97	14-24	24-28	28-38	0.75	0.78	0.32	0.41	0.37	0.47	0.20	0.63

d₁	l₁	a₁ in millimeters	a₂ in millimeters	a₃ in millimeters	d₂	d₃	d₄	d₅	k	l₂	l₃	A/F

M 5	0.79	2.5-6	6-10.5	10.5-14	0.43	0.46	0.16	0.22	0.28	0.24	0.10	0.31
M 5	0.98	6-11	11-14	14-19	0.43	0.46	0.16	0.22	0.28	0.24	0.10	0.31
M 6	0.98	3-7	7-13	13-17	0.51	0.54	0.19	0.26	0.30	0.31	0.12	0.39
M 6	1.18	7-12	12-17	17-22	0.51	0.54	0.19	0.26	0.30	0.31	0.12	0.39
M 8	1.18	4-8	8-16	16-20	0.63	0.66	0.26	0.33	0.33	0.39	0.16	0.51
M 8	1.57	8-18	18-25	25-30	0.63	0.66	0.26	0.33	0.33	0.39	0.16	0.51
M 10	1.57	5-14	14-19	19-28	0.75	0.78	0.32	0.41	0.37	0.47	0.20	0.63
M 10	1.97	14-24	24-28	28-38	0.75	0.78	0.32	0.41	0.37	0.47	0.20	0.63

3D Product Configurator

Selected Part

Part Number

Total US Dollars (net)

$19.01

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	24	$19.01
25	49	$17.42
50	99	$15.84
≥ 100		$14.26

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.011 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.